{"product_id":"twister-t4-variable-speed-trim-saver-combo-package","title":"Twister T4 Variable Speed \u0026 Trim Saver Combo Package","description":"\u003cp\u003eThe Twister T4 Variable Speed \u0026amp; Trim Saver Combo Package is built for growers and processing operations that want more than faster trimming. It combines the precision and throughput of the variable speed T4 with Twister's Trim Saver system to create a complete workflow designed around three priorities: finished flower quality, processing efficiency, and recovery of valuable trim.\u003c\/p\u003e\n\u003cp\u003eAt the center of the system is the Twister T4, a compact commercial trimming machine capable of processing up to 23 lbs of wet material or 7 lbs of dry material per hour with a single unit. Instead of forcing every harvest through the same fixed operating conditions, the variable speed T4 gives the operator independent control over blade speed and tumbler speed, along with the ability to reduce vacuum suction. Six available blade settings and six tumbler settings create 36 different trimming configurations, allowing the machine to be adjusted around flower condition, density, moisture level, cultivar, and the desired finished appearance.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThat adjustability becomes especially valuable when one facility handles both wet and dry material. Fresh flower may need a completely different combination of movement, cutting speed, airflow, and residence time than delicate dried flower. Rather than treating those differences as compromises, the T4 gives the operator the controls needed to develop a repeatable process for each harvest.\u003c\/p\u003e\n\u003cp\u003eThe T4 uses Twister's SoftTumble Technology, combining a compact tumbler diameter with a polished stainless steel surface to reduce wall crawl and shorten the distance flower travels while being processed. The objective is simple: expose unwanted leaf material to the cutting system while minimizing unnecessary impact and handling of the flower itself.\u003c\/p\u003e\n\u003cp\u003eThe defining advantage of this package, however, is what happens to the material removed during trimming.\u003c\/p\u003e\n\u003cp\u003eTraditional collection systems can pull valuable trim through a high speed vacuum impeller before it reaches the collection bag. That may be acceptable when trim is treated strictly as waste, but it becomes a major disadvantage when the recovered material is intended for extraction, pressing, or another secondary process.\u003c\/p\u003e\n\u003cp\u003eThe Twister Trim Saver is designed specifically to address that problem. It uses radial cyclone technology to generate the required airflow while effectively bypassing the standard vacuum impeller. This allows valuable trim to be collected without first sending it through the impeller, helping preserve the physical integrity of the recovered material for downstream processing. Twister specifically recommends the Trim Saver for premium applications where trim needs to remain preserved and intact for extraction and pressing.\u003c\/p\u003e\n\u003cp\u003eThat makes this package particularly compelling for operations that view trim as a secondary product stream rather than processing waste. You are not simply buying a faster way to trim flower. You are building a workflow intended to protect value on both sides of the tumbler.\u003c\/p\u003e\n\u003ch3\u003ePrecision Control for Different Harvest Conditions\u003c\/h3\u003e\n\u003cp\u003eNo two harvests behave exactly the same way inside a trimming machine. Moisture content, flower density, leaf structure, cultivar, preparation, feeding rate, and desired finish can all affect the final result.\u003c\/p\u003e\n\u003cp\u003eTwister designed the variable speed T4 around that reality.\u003c\/p\u003e\n\u003cp\u003eThe digital control system provides independent adjustment of the tumbler and cutting blades, while airflow can also be reduced through vacuum bypass control.\u003c\/p\u003e\n\u003cp\u003eThe blade itself can operate from approximately 980 to 1,875 RPM, while tumbler speed can be adjusted from approximately 47 to 96 RPM.\u003c\/p\u003e\n\u003cp\u003eThis gives experienced operators considerably more control over the relationship between cutting action and the amount of physical movement experienced by the flower.\u003c\/p\u003e\n\u003cp\u003eFor delicate dry material, that can mean slowing the process down and prioritizing flower integrity. For freshly harvested material, settings can be adjusted to create a more aggressive workflow when conditions call for it.\u003c\/p\u003e\n\u003cp\u003eThe result is a machine that can be tuned around the product instead of requiring the product to conform to one fixed machine setting.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Wet and Dry Trimming\u003c\/h3\u003e\n\u003cp\u003eThe T4 platform is designed to accommodate both wet and dry processing, but successful trimming begins before material enters the tumbler.\u003c\/p\u003e\n\u003cp\u003eFor wet trimming, Twister recommends processing flower shortly after bucking and keeping the material cool beforehand. Firm leaves are easier for an automated trimming system to process, while wilted leaves may wrap around the flower and reduce trimming performance. Larger fan leaves and excess stems should also be removed before loading.\u003c\/p\u003e\n\u003cp\u003eDry trimming requires a different approach. Twister identifies approximately 10% to 11% moisture as an ideal starting range, with the exterior dry while the interior remains slightly spongy. The company's simple test is useful: flower that crumbles when lightly squeezed is too dry, flower that remains compressed is too moist, and flower that springs back is closer to the desired condition.\u003c\/p\u003e\n\u003cp\u003eThat guidance illustrates why variable speed matters. A machine processing freshly bucked wet flower is dealing with fundamentally different material than one processing carefully dried flower at approximately 10% moisture.\u003c\/p\u003e\n\u003cp\u003eWith the T4, those workflows do not need to share identical machine settings.\u003c\/p\u003e\n\u003ch3\u003eDial In Residence Time and Finish Quality\u003c\/h3\u003e\n\u003cp\u003eSpeed control is only one part of producing a consistent trim. Twister identifies three important process variables when dialing in the T4: machine incline, loading speed, and time inside the tumbler.\u003c\/p\u003e\n\u003cp\u003eAs an initial reference point, Twister recommends approximately a one inch incline, feeding roughly one handful every 20 to 30 seconds, and targeting approximately 30 to 45 seconds of residence time inside the tumbler. Those figures are starting points rather than universal settings.\u003c\/p\u003e\n\u003cp\u003eThe operator can then inspect the output and adjust the workflow around the actual flower being processed.\u003c\/p\u003e\n\u003cp\u003eIf flower exits before achieving the desired finish, Twister recommends either decreasing the machine incline or slowing the feed rate. Overloading should also be avoided because excessive material inside the tumbler can rapidly reduce trim quality.\u003c\/p\u003e\n\u003cp\u003eThis ability to observe, adjust, and repeat is one of the T4's greatest strengths for professional operations. Once an effective combination of preparation, machine settings, incline, feeding rate, and residence time has been established for a particular harvest, the process becomes much easier to reproduce.\u003c\/p\u003e\n\u003ch3\u003eSoftTumble Technology Protects Flower Quality\u003c\/h3\u003e\n\u003cp\u003eMechanical trimming requires contact, but unnecessary contact can reduce finished flower quality.\u003c\/p\u003e\n\u003cp\u003eTwister's SoftTumble design uses a relatively small tumbler diameter and polished stainless steel surface to minimize impact by reducing both wall crawl and overall tumble distance.\u003c\/p\u003e\n\u003cp\u003eInstead of repeatedly throwing material through a large chamber, the T4 is designed to create a shorter, more controlled path through the trimming zone.\u003c\/p\u003e\n\u003cp\u003eThis low touch approach becomes particularly important with dried flower, where excessive tumbling or aggressive handling can damage fragile material. Combined with adjustable tumbler and blade speeds, SoftTumble gives operators another way to balance throughput against the quality standard required for the finished product.\u003c\/p\u003e\n\u003ch3\u003eTrim Saver Turns Byproduct Into an Asset\u003c\/h3\u003e\n\u003cp\u003eThe Trim Saver is what separates this package from a standard T4 trimming setup.\u003c\/p\u003e\n\u003cp\u003eDuring normal trimming, airflow is needed to pull cut leaf material away from the tumbler and maintain effective cutting performance. With a conventional collection system, that material may pass through a vacuum impeller during collection.\u003c\/p\u003e\n\u003cp\u003eThe Trim Saver changes the collection path.\u003c\/p\u003e\n\u003cp\u003eIts radial cyclone design generates airflow while bypassing the standard vacuum impeller, allowing trim to be recovered without undergoing the same destructive contact before collection. Twister developed the system specifically for premium applications where recovered trim is destined for extraction, pressing, or other secondary processing.\u003c\/p\u003e\n\u003cp\u003eFor facilities that monetize their secondary material, this can fundamentally change the economics of trimming. Throughput remains important, but the objective becomes maximizing the value of the entire harvest rather than only the finished flower.\u003c\/p\u003e\n\u003ch3\u003eTrim Saver CS-12 Performance and Specifications\u003c\/h3\u003e\n\u003cp\u003eThe following details were not included in the originally supplied product description and were confirmed through Twister's own product pages and multiple authorized retailer listings. The Trim Saver used with the T4 is Twister's CS-12 model. Twister and its retailers state that the CS-12 collects over 99% of processed material in its removable stainless steel collection bin, working with both wet and dry T4 trimming.\u003c\/p\u003e\n\u003cp\u003eThe CS-12 is powered by a 1.5 HP motor running at approximately 3,450 RPM, producing an airflow capacity of approximately 1,190 CFM against roughly 6.5 inches of static water pressure. It draws approximately 15 amps running and up to 47 amps at startup, operates on 120V power, and requires a 20A\/120V circuit breaker with a NEMA 5-15P connector. The unit uses a 10 inch impeller and a 5 inch cyclone inlet, and Twister rates it with a sound level around 80 dB.\u003c\/p\u003e\n\u003cp\u003eTwister and its retailers also describe the CS-12 as effectively plug-and-play: the vacuum hose connects to the trimmer, and the unit is switched on. The removable collection bin is designed for quick wipedowns between sessions, with some retailer listings citing cleaning times of approximately two minutes.\u003c\/p\u003e\n\u003ch3\u003eTrim Collector Stand Requirement\u003c\/h3\u003e\n\u003cp\u003eTwister and its retailers note that the T4 Trim Collector requires a separate T4 stand for proper operation unless one is already part of the configuration. This package includes the Twister T4 Trimmer Stand as a standard component, so the stand requirement is already accounted for in this combo.\u003c\/p\u003e\n\u003ch3\u003eCommercial Throughput Without a Massive Footprint\u003c\/h3\u003e\n\u003cp\u003eA single T4 can process up to 23 lbs per hour wet or 7 lbs per hour dry, giving small and midsize operations meaningful commercial throughput without immediately moving into a much larger industrial trimming platform.\u003c\/p\u003e\n\u003cp\u003eThe machine itself measures approximately 25 inches long, 15 inches wide, and 16.5 inches high, with a machine weight of approximately 56 lbs.\u003c\/p\u003e\n\u003cp\u003eThat relatively compact footprint gives operators flexibility when designing a harvest room or processing area. It can also make the T4 attractive for facilities where equipment may need to be repositioned between harvests rather than permanently installed.\u003c\/p\u003e\n\u003cp\u003eDespite that compact size, the system is not designed as a dead end.\u003c\/p\u003e\n\u003ch3\u003eStart With One T4 and Scale Inline\u003c\/h3\u003e\n\u003cp\u003eHarvest volume rarely stays static. Purchasing a system that works today but has to be completely replaced when production increases can become expensive quickly.\u003c\/p\u003e\n\u003cp\u003eThe T4 is designed around modular expansion.\u003c\/p\u003e\n\u003cp\u003eA single machine is rated for up to 23 lbs per hour wet. Twister's published inline figures increase to approximately 52 lbs per hour with two T4 units and 78 lbs per hour with three. For dry material, published throughput increases from approximately 7 lbs per hour with one unit to 16 lbs per hour with two units.\u003c\/p\u003e\n\u003cp\u003eThis means an operation can begin with one T4 and expand the trimming line as harvest volume increases rather than immediately investing in an entirely different processing platform.\u003c\/p\u003e\n\u003cp\u003eThat modular architecture is particularly useful for growing facilities because equipment capacity can follow production capacity.\u003c\/p\u003e\n\u003ch3\u003eDesigned Around Cleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003eProcessing equipment needs to be easy to clean because downtime between batches directly affects productivity.\u003c\/p\u003e\n\u003cp\u003eTwister recommends cleaning the T4 trimmer every four hours of operation. The tumbler, hopper, shroud, and belt cover can be removed for cleaning, and the tumbler can be soaked in hot water with an approved cleaning solution before rinsing. Bearings are recommended for greasing every 1,000 hours of use.\u003c\/p\u003e\n\u003cp\u003eTwister also allows the machine itself to be pressure washed after the control box has been removed. The control box is not watertight and must be cleaned separately by hand.\u003c\/p\u003e\n\u003cp\u003eFor commercial processing environments, these service considerations matter almost as much as headline throughput. Equipment that can be accessed, cleaned, inspected, and returned to service efficiently helps reduce the amount of time a harvest line spends idle.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the T4 With Trim Saver?\u003c\/h3\u003e\n\u003cp\u003eThe standalone T4 is an excellent choice when the primary objective is efficient wet and dry trimming.\u003c\/p\u003e\n\u003cp\u003eThe T4 Variable Speed \u0026amp; Trim Saver Combo makes more sense when the material removed during trimming also has value.\u003c\/p\u003e\n\u003cp\u003eYou still receive the T4's compact commercial platform, variable blade and tumbler control, wet and dry versatility, SoftTumble technology, and scalable inline architecture. The difference is that the Trim Saver adds a collection system specifically designed to preserve valuable trim for downstream use.\u003c\/p\u003e\n\u003cp\u003eFor operations producing extracts, concentrates, pressed products, or any other secondary product from recovered trim, that distinction can be significant.\u003c\/p\u003e\n\u003cp\u003eInstead of optimizing only for pounds of finished flower per hour, the entire processing workflow can be optimized around throughput, finished flower quality, and trim recovery simultaneously.\u003c\/p\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eThe Twister T4 Variable Speed \u0026amp; Trim Saver Combo Package is best suited to craft and commercial cultivators that need meaningful hourly throughput but are unwilling to treat flower quality or recovered trim as an afterthought.\u003c\/p\u003e\n\u003cp\u003eIt is particularly well suited to operations that process both wet and dry material, produce extraction products from recovered trim, expect harvest volume to increase over time, or want a trimming platform that can be tuned around different cultivars and flower conditions instead of operating at one fixed speed.\u003c\/p\u003e\n\u003cp\u003eFor those facilities, the T4 and Trim Saver combination offers something more valuable than raw speed alone: control over the entire trimming process and greater opportunity to capture value from the entire harvest.\u003c\/p\u003e\n\u003ch3\u003eWet Trimming Tips\u003c\/h3\u003e\n\u003cp\u003eFor wet processing, trim shortly after the material has been bucked from the plant. Twister recommends keeping plants cold before processing and watering approximately four to six hours before the trim session. Firm, responsive leaves are generally easier for an automated system to cut than wilted leaves.\u003c\/p\u003e\n\u003cp\u003eRemove larger fan leaves and cut stems close to the flower before feeding the T4. Excess plant material can wrap around the flower and prevent unwanted leaf from reaching the cutting blades efficiently.\u003c\/p\u003e\n\u003ch3\u003eDry Trimming Tips\u003c\/h3\u003e\n\u003cp\u003eFor dry processing, Twister recommends beginning around 10% to 11% flower moisture, with a dry exterior and slightly spongy interior.\u003c\/p\u003e\n\u003cp\u003eBefore drying, remove fan leaves and larger leafy material. Once the desired moisture level is reached, buck the flower and cut stems close to the flower. Long stems can interfere with the movement of flower through the tumbler and reduce access to the cutting blades.\u003c\/p\u003e\n\u003ch3\u003eCleaning \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cp\u003eTwister recommends cleaning the T4 after approximately every four hours of use. The control box should always be removed before washing the machine because it is not watertight.\u003c\/p\u003e\n\u003cp\u003eThe tumbler, hopper, shroud, and belt cover can be removed and cleaned separately. Twister recommends allowing the machine to dry completely before storage and greasing all bearings approximately every 1,000 operating hours.\u003c\/p\u003e\n\u003cp\u003eThe Trim Saver's removable stainless steel collection bin and cleanable cyclone are designed for quick wipedowns between sessions rather than extensive teardown cleaning.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwister T4 Variable Speed Trimmer\u003c\/li\u003e\n\u003cli\u003eTwister T4 Trim Saver\u003c\/li\u003e\n\u003cli\u003eTwister T4 Trimmer Stand\u003c\/li\u003e\n\u003cli\u003eWet and Dry Compatible Tumbler\u003c\/li\u003e\n\u003cli\u003eLarge Capacity Hopper\u003c\/li\u003e\n\u003cli\u003eRequired System Components for the Trim Saver Configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptional add-ons available: Twister Cure Puck Gen 2, Twister T4 Trimmer Parts Kit, Twister T4 Trim Saver Parts Kit.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTwister\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eVariable Speed Wet and Dry Trimming System with Trim Saver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWet Throughput\u003c\/td\u003e\n\u003ctd\u003eUp to 23 lbs\/hr with one T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Throughput\u003c\/td\u003e\n\u003ctd\u003eUp to 7 lbs\/hr with one T4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage (T4)\u003c\/td\u003e\n\u003ctd\u003e115V, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw (T4)\u003c\/td\u003e\n\u003ctd\u003e2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Motor\u003c\/td\u003e\n\u003ctd\u003e200W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Speed\u003c\/td\u003e\n\u003ctd\u003e980 to 1,875 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Motor\u003c\/td\u003e\n\u003ctd\u003e6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Speed\u003c\/td\u003e\n\u003ctd\u003e47 to 96 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Diameter\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Slots\u003c\/td\u003e\n\u003ctd\u003e40 x 0.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut Height\u003c\/td\u003e\n\u003ctd\u003e0.040 in \/ 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT4 Weight\u003c\/td\u003e\n\u003ctd\u003e56 lbs \/ 25.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e120 lbs \/ 54.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT4 Dimensions\u003c\/td\u003e\n\u003ctd\u003e25 in L x 15 in W x 16.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCircuit Breaker Required (T4)\u003c\/td\u003e\n\u003ctd\u003e15A \/ 120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector (T4)\u003c\/td\u003e\n\u003ctd\u003eNEMA 5-15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Extension Cord\u003c\/td\u003e\n\u003ctd\u003e12 AWG minimum, 25 ft maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Model\u003c\/td\u003e\n\u003ctd\u003eCS-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Motor\u003c\/td\u003e\n\u003ctd\u003e1.5 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Motor Speed\u003c\/td\u003e\n\u003ctd\u003eApprox. 3,450 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Airflow\u003c\/td\u003e\n\u003ctd\u003eApprox. 1,190 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Static Pressure\u003c\/td\u003e\n\u003ctd\u003eApprox. 6.5 in H2O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Current Draw\u003c\/td\u003e\n\u003ctd\u003e15A Running \/ 47A Startup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Circuit Breaker Required\u003c\/td\u003e\n\u003ctd\u003e20A \/ 120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Connector\u003c\/td\u003e\n\u003ctd\u003eNEMA 5-15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Impeller\u003c\/td\u003e\n\u003ctd\u003e10 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Cyclone Inlet\u003c\/td\u003e\n\u003ctd\u003e5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Sound Rating\u003c\/td\u003e\n\u003ctd\u003eApprox. 80 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Saver Recovery Rate\u003c\/td\u003e\n\u003ctd\u003eOver 99% of Processed Material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScalable Configuration\u003c\/td\u003e\n\u003ctd\u003eMultiple T4 Units Can Operate Inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Twister","offers":[{"title":"Not Included \/ Not Included \/ Not Included","offer_id":50067418611962,"sku":null,"price":16806.0,"currency_code":"USD","in_stock":true},{"title":"Add Twister Cure Puck Gen 2 (+$585) \/ Not Included \/ Not Included","offer_id":50067418644730,"sku":null,"price":17391.0,"currency_code":"USD","in_stock":true},{"title":"Not Included \/ Add Twister T4 Trimmer Parts Kit (+$1,395) \/ Not Included","offer_id":50067418677498,"sku":null,"price":18201.0,"currency_code":"USD","in_stock":true},{"title":"Not Included \/ Not Included \/ Add Twister T4 Trim Saver Parts Kit (+$1,595)","offer_id":50067418710266,"sku":null,"price":18401.0,"currency_code":"USD","in_stock":true},{"title":"Add Twister Cure Puck Gen 2 (+$585) \/ Add Twister T4 Trimmer Parts Kit (+$1,395) \/ Not Included","offer_id":50067418743034,"sku":null,"price":18786.0,"currency_code":"USD","in_stock":true},{"title":"Add Twister Cure Puck Gen 2 (+$585) \/ Not Included \/ Add Twister T4 Trim Saver Parts Kit (+$1,595)","offer_id":50067418775802,"sku":null,"price":18986.0,"currency_code":"USD","in_stock":true},{"title":"Not Included \/ Add Twister T4 Trimmer Parts Kit (+$1,395) \/ Add Twister T4 Trim Saver Parts Kit (+$1,595)","offer_id":50067418808570,"sku":null,"price":19796.0,"currency_code":"USD","in_stock":true},{"title":"Add Twister Cure Puck Gen 2 (+$585) \/ Add Twister T4 Trimmer Parts Kit (+$1,395) \/ Add Twister T4 Trim Saver Parts Kit (+$1,595)","offer_id":50067418841338,"sku":null,"price":20381.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/020fe6f6-2c7b-45c3-aafb-0f7832aa1604.png?v=1786626300","url":"https:\/\/cultivasupply.com\/products\/twister-t4-variable-speed-trim-saver-combo-package","provider":"Cultiva Supply","version":"1.0","type":"link"}