{"product_id":"twister-t2-wet-dry-bud-trimming-machine","title":"Twister T2 Wet \u0026 Dry Bud Trimming Machine","description":"\u003cp\u003eThe Twister T2 Wet \u0026amp; Dry Bud Trimming Machine is built for commercial cultivation facilities that have moved beyond simply asking how quickly they can trim and now need to control the entire processing workflow around throughput, consistency, sanitation, worker safety, and future expansion.\u003c\/p\u003e\n\u003cp\u003eCapable of processing up to 35 lbs of wet material or 11 lbs of dry material per hour with a single machine, the T2 is designed for continuous production environments where manual trimming has become a serious labor bottleneck. Instead of depending on a large seasonal trimming crew, operators can establish a repeatable process that continues running batch after batch with consistent mechanical settings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThroughput: Up to 35 lbs Wet or 11 lbs Dry Per Hour\u003c\/li\u003e\n\u003cli\u003ePrecision: 19,250 StaySharp Cuts Every Minute\u003c\/li\u003e\n\u003cli\u003eSanitation: Full High Pressure Washdown Ready Design\u003c\/li\u003e\n\u003cli\u003eScalability: Expand to 124 lbs Per Hour Inline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe T2 is powered by an industrial cutting system built around 11 StaySharp blades producing approximately 19,250 cuts every minute. Rather than simply increasing tumbler speed to chase throughput, Twister engineered the system around extremely rapid, precise cutting action combined with controlled movement through the tumbler. When two machines are used together, Twister states that the combined 22 StaySharp blades deliver almost 40,000 precise, scissor like cuts every 60 seconds.\u003c\/p\u003e\n\u003cp\u003eThat cutting performance is paired with a 304 stainless steel tumbler, nitrided steel blades, commercial motors, full guarding, interlocked safety systems, and washdown ready electrical components. Twister designed the modern T2 specifically around the demands of regulated commercial processing environments, with an emphasis on both production performance and the ability to repeatedly clean the machine between shifts and batches.\u003c\/p\u003e\n\u003cp\u003eFor facilities processing larger harvests, the T2 also provides one of the most important characteristics a capital equipment purchase can offer: you do not have to replace it when your production increases.\u003c\/p\u003e\n\u003cp\u003eStart with one T2. Add a second when volume grows. Add a third when the facility requires another jump in capacity. Twister's continuous flow architecture allows multiple machines to operate inline, with published wet throughput reaching 78 lbs per hour with two machines and 124 lbs per hour with three machines.\u003c\/p\u003e\n\u003cp\u003eThat makes the T2 less like an isolated trimming machine and more like the foundation of a scalable commercial harvest line.\u003c\/p\u003e\n\u003ch3\u003eCommercial Throughput Without Sacrificing Control\u003c\/h3\u003e\n\u003cp\u003eThe T2 is designed for operations where several hundred pounds of material can turn trimming into one of the largest labor demands in the entire harvest process.\u003c\/p\u003e\n\u003cp\u003eA single T2 processes up to 35 lbs per hour wet or 11 lbs per hour dry.\u003c\/p\u003e\n\u003cp\u003eUnlike a traditional batch trimming machine, the T2 operates as a continuous flow system. Material enters one side, progresses through the rotating tumbler, passes through the primary cutting zone, and exits the opposite end.\u003c\/p\u003e\n\u003cp\u003eThat continuous movement allows operators to establish a predictable production rhythm rather than repeatedly loading, stopping, unloading, and restarting individual batches.\u003c\/p\u003e\n\u003cp\u003eTwister specifically promotes the T2 for continuous duty operation in demanding harvest environments.\u003c\/p\u003e\n\u003cp\u003eFor a commercial facility, the value of that design goes beyond simple pounds per hour. Preparation staff can continuously supply the trimming line. Quality control staff can continuously inspect finished material. Conveyors can continuously feed and discharge the system. Trim collection can operate simultaneously.\u003c\/p\u003e\n\u003cp\u003eThe T2 therefore becomes part of a production line rather than a standalone machine that dictates the rhythm of the entire room.\u003c\/p\u003e\n\u003ch3\u003e19,250 Precision Cuts Per Minute\u003c\/h3\u003e\n\u003cp\u003eThe cutting system is one of the defining differences between the T2 and lighter duty trimming equipment.\u003c\/p\u003e\n\u003cp\u003eThe T2 uses 11 StaySharp cutting blades engineered to perform approximately 19,250 cuts per minute.\u003c\/p\u003e\n\u003cp\u003eWith two T2 units operating together, Twister states that 22 StaySharp blades deliver almost 40,000 precise cuts every minute while maintaining uniform output hour after hour.\u003c\/p\u003e\n\u003cp\u003eThe objective is not simply raw cutting speed. The rapid blade action allows unwanted leaf material that passes through the tumbler openings to be cut quickly while the flower itself continues moving through the drum.\u003c\/p\u003e\n\u003cp\u003eThat relationship between tumbler movement and blade speed is central to producing commercial throughput while minimizing unnecessary time inside the trimming chamber.\u003c\/p\u003e\n\u003ch3\u003eWet Trimming Preparation\u003c\/h3\u003e\n\u003cp\u003eFor wet trimming, Twister recommends processing flower soon after it has been removed from the plant.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer recommends watering plants approximately four to six hours before trimming and keeping them cool before processing. The reason is mechanical: firm leaves are easier for an automated cutting system to engage, while wilted leaves can wrap around the flower and reduce performance.\u003c\/p\u003e\n\u003cp\u003ePreparation matters just as much. Twister recommends removing larger fan leaves and excessive leafy material before the flower enters the T2. Stems should also be cut close to the flower. Large pieces can wrap around the product and reduce the opportunity for unwanted material to reach the cutting blades.\u003c\/p\u003e\n\u003cp\u003eThat preparation helps the machine spend its processing time performing precision cleanup instead of trying to remove large material that should have been eliminated upstream.\u003c\/p\u003e\n\u003ch3\u003eDry Trimming at the Correct Moisture Level\u003c\/h3\u003e\n\u003cp\u003eDry trimming introduces a completely different material condition.\u003c\/p\u003e\n\u003cp\u003eTwister recommends approximately 10% to 11% moisture for dry processing. At this point, the outside of the flower should feel dry while the interior retains some resilience.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer provides a simple physical test: if the flower crumbles when lightly squeezed, it is too dry; if it remains compressed, it is too moist; if it compresses and then rebounds, it is closer to the desired condition.\u003c\/p\u003e\n\u003cp\u003eThis matters because over dried material can become more fragile during mechanical handling, while material that remains too moist may not allow unwanted leaf to separate efficiently.\u003c\/p\u003e\n\u003ch3\u003eDifferent Tumblers for Different Conditions\u003c\/h3\u003e\n\u003cp\u003eTwister's own trimming documentation demonstrates how seriously it treats product condition.\u003c\/p\u003e\n\u003cp\u003eFor dry processing, the company's historical guide identifies a 3\/16 inch stainless steel tumbler as an effective configuration for most dry flower types. A quarter inch tumbler may perform differently with larger flower and moisture levels around 11% to 13%.\u003c\/p\u003e\n\u003cp\u003eFor wet processing, the standard guide identifies a quarter inch stainless steel tumbler, while the smaller 3\/16 inch option may improve results with certain smaller flower types.\u003c\/p\u003e\n\u003cp\u003eThe key point is not that one configuration is universally superior. The T2 platform allows operators to select the setup that best matches their product and quality goals.\u003c\/p\u003e\n\u003ch3\u003eDial In the First 10 to 15 Minutes\u003c\/h3\u003e\n\u003cp\u003eTwister specifically recommends using the beginning of each trimming session to evaluate the incoming product and establish the appropriate processing rhythm.\u003c\/p\u003e\n\u003cp\u003eThree variables should be considered: machine incline, loading speed, and time inside the tumbler.\u003c\/p\u003e\n\u003cp\u003eAs a starting reference, Twister recommends beginning with the machine level, loading approximately one handful every 20 to 30 seconds, and targeting approximately 30 to 45 seconds inside the tumbler.\u003c\/p\u003e\n\u003cp\u003eThese are not fixed rules. They are a baseline from which operators can adjust the machine around the actual flower being processed.\u003c\/p\u003e\n\u003ch3\u003eResidence Time Controls Final Quality\u003c\/h3\u003e\n\u003cp\u003eThe T2 should not simply be fed as fast as physically possible.\u003c\/p\u003e\n\u003cp\u003eMaterial needs enough time inside the cutting zone for unwanted leaf to interact with the trimming system.\u003c\/p\u003e\n\u003cp\u003eTwister recommends loading an initial quantity of roughly two ounces, allowing it approximately 30 to 45 seconds in the tumbler, and then gradually introducing additional handfuls every 20 to 30 seconds.\u003c\/p\u003e\n\u003cp\u003eOnce the system reaches equilibrium, new material entering the machine pushes processed material toward the discharge side.\u003c\/p\u003e\n\u003cp\u003eThat establishes the continuous flow rhythm the T2 was designed around.\u003c\/p\u003e\n\u003ch3\u003eAvoid Overloading the Tumbler\u003c\/h3\u003e\n\u003cp\u003eOne of the easiest ways to reduce trimming quality is to overload the T2 in an attempt to increase throughput.\u003c\/p\u003e\n\u003cp\u003eTwister recommends keeping approximately two ounces of material in the tumbler during normal operation and describes approximately half full across the width of the tumbler as an effective working amount.\u003c\/p\u003e\n\u003cp\u003eExcessive material prevents flower from moving properly and limits the ability of the leaf to reach the cutting surface.\u003c\/p\u003e\n\u003cp\u003eIn other words, commercial output comes from continuous flow, not from packing the machine as full as possible.\u003c\/p\u003e\n\u003ch3\u003eQuality Control Happens While You Trim\u003c\/h3\u003e\n\u003cp\u003eThe T2 is designed to be adjusted during production.\u003c\/p\u003e\n\u003cp\u003eAs the first material exits, operators should evaluate the final appearance.\u003c\/p\u003e\n\u003cp\u003eIf additional trimming is required, Twister recommends either reducing the incline or slowing the loading rate so the material spends more time inside the tumbler.\u003c\/p\u003e\n\u003cp\u003eOnce the desired result has been established, operators can maintain a repeatable loading rhythm.\u003c\/p\u003e\n\u003cp\u003eThis approach lets facilities build processing recipes around different cultivars and material conditions rather than rediscovering the correct process every harvest.\u003c\/p\u003e\n\u003ch3\u003eScale From 35 to 124 lbs Per Hour\u003c\/h3\u003e\n\u003cp\u003eOne of the strongest reasons to invest in the T2 is its ability to grow with the facility.\u003c\/p\u003e\n\u003cp\u003eTwister's continuous flow architecture allows multiple T2 units to run inline.\u003c\/p\u003e\n\u003cp\u003ePublished throughput for the current commercial system is: one T2 up to 35 lbs per hour wet, two T2s up to 78 lbs per hour wet, three T2s up to 124 lbs per hour wet. For dry trimming, one T2 processes up to 11 lbs per hour and two T2s reach up to 25 lbs per hour.\u003c\/p\u003e\n\u003cp\u003eTwister's brochure also explains that two T2 units can operate back to back without requiring additional operators.\u003c\/p\u003e\n\u003cp\u003eThat creates a very different investment path from equipment that must be replaced once production exceeds its original capacity.\u003c\/p\u003e\n\u003ch3\u003eAdd Equipment as Your Facility Grows\u003c\/h3\u003e\n\u003cp\u003eThe T2 can be expanded into a complete processing line with Twister rails and conveyor systems.\u003c\/p\u003e\n\u003cp\u003eAvailable infrastructure includes the T2 Rail, Rail Extensions, Inbound Feed Conveyor, Outbound Quality Control Conveyor, T2 Leaf Collector, and T2 Trim Saver. Twister lists each of these as compatible T2 accessories and system components.\u003c\/p\u003e\n\u003cp\u003eThe inbound conveyor improves feeding consistency while the outbound conveyor provides operators with an organized quality control station where material can be visually inspected and touched up before moving downstream.\u003c\/p\u003e\n\u003cp\u003eTwister states that its feed conveyor can improve trimming speed and consistency by up to 20%.\u003c\/p\u003e\n\u003ch3\u003ePortable Despite Its Industrial Build\u003c\/h3\u003e\n\u003cp\u003eThe T2 is a serious commercial machine, but it is not permanently anchored to one processing line.\u003c\/p\u003e\n\u003cp\u003eHeavy duty wheels allow the machine to be moved between processing areas or repositioned for cleaning and maintenance. Twister specifically highlights the wheeled chassis as useful for both indoor and outdoor movement.\u003c\/p\u003e\n\u003cp\u003eThat mobility can make a major difference in facilities where harvest rooms need to be reconfigured throughout the year.\u003c\/p\u003e\n\u003ch3\u003eOptional Leaf Collector\u003c\/h3\u003e\n\u003cp\u003eThe T2 can be configured with Twister's commercial Leaf Collector for integrated trim removal.\u003c\/p\u003e\n\u003cp\u003eThe collector uses a 2 HP motor, provides approximately 1,700 CFM of airflow, and operates from a 230V supply.\u003c\/p\u003e\n\u003cp\u003eFor facilities using the standard collection workflow, the Leaf Collector provides the suction required to continuously remove cut material from the trimming chamber and direct it into the collection system.\u003c\/p\u003e\n\u003ch3\u003eOptional Trim Saver\u003c\/h3\u003e\n\u003cp\u003eFacilities that consider recovered trim a valuable secondary product can upgrade to the Twister T2 Trim Saver.\u003c\/p\u003e\n\u003cp\u003eTwister's own trimming guides describe the Trim Saver as the premium option when recovered material needs to remain intact for extraction, pressing, and related processing.\u003c\/p\u003e\n\u003cp\u003eInstead of forcing the collected material through a conventional vacuum impeller, the Trim Saver uses radial cyclone technology to generate airflow while effectively bypassing the impeller.\u003c\/p\u003e\n\u003cp\u003eThat allows the trimming line to protect value on both sides of the tumbler.\u003c\/p\u003e\n\u003ch3\u003eStrength in Numbers\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eT2 Units\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eThroughput\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eWet\u003c\/td\u003e\n\u003ctd\u003eUp to 35 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eWet\u003c\/td\u003e\n\u003ctd\u003eUp to 78 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eWet\u003c\/td\u003e\n\u003ctd\u003eUp to 124 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003ctd\u003eUp to 11 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eDry\u003c\/td\u003e\n\u003ctd\u003eUp to 25 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eRecommended Wet Processing Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProcess freshly bucked material soon after removal from the plant.\u003c\/li\u003e\n\u003cli\u003eKeep plants cool before trimming.\u003c\/li\u003e\n\u003cli\u003eWater approximately four to six hours before the session.\u003c\/li\u003e\n\u003cli\u003eRemove larger fan leaves before loading.\u003c\/li\u003e\n\u003cli\u003eCut stems close to the flower.\u003c\/li\u003e\n\u003cli\u003eBegin with approximately two ounces of material.\u003c\/li\u003e\n\u003cli\u003eAllow approximately 30 to 45 seconds before adding more.\u003c\/li\u003e\n\u003cli\u003eContinue feeding approximately one handful every 20 to 30 seconds once the process is dialed in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Dry Processing Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTarget approximately 10% to 11% moisture.\u003c\/li\u003e\n\u003cli\u003eRemove fan leaves and larger leafy material before drying.\u003c\/li\u003e\n\u003cli\u003eCut stems close to the flower before processing.\u003c\/li\u003e\n\u003cli\u003eBegin with the T2 level.\u003c\/li\u003e\n\u003cli\u003eStart with approximately two ounces of material.\u003c\/li\u003e\n\u003cli\u003eTarget approximately 30 to 45 seconds inside the tumbler.\u003c\/li\u003e\n\u003cli\u003eAdjust machine incline or loading speed based on final appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwister recommends cleaning the T2 approximately every four hours of operation and the Leaf Collector approximately every eight hours. Approved cleaning options include Simple Green Industrial Cleaner and 99% rubbing alcohol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eT2 Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the machine from power.\u003c\/li\u003e\n\u003cli\u003eRemove the tumbler, hopper, and protective shrouds.\u003c\/li\u003e\n\u003cli\u003eApply the appropriate cleaning solution.\u003c\/li\u003e\n\u003cli\u003ePressure wash the machine or clean it by hand.\u003c\/li\u003e\n\u003cli\u003eClean the tumbler separately.\u003c\/li\u003e\n\u003cli\u003eRun the machine briefly after washing to remove excess water.\u003c\/li\u003e\n\u003cli\u003eFinish drying with compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeaf Collector Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove and clean the filter bag.\u003c\/li\u003e\n\u003cli\u003eDisconnect the hose and open the housing.\u003c\/li\u003e\n\u003cli\u003eRemove the impeller for hand cleaning.\u003c\/li\u003e\n\u003cli\u003eClean the inside of the housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperator Safety\u003c\/h3\u003e\n\u003cp\u003eThe T2 is a high speed cutting machine and should only be operated by trained personnel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlways use a properly grounded electrical receptacle.\u003c\/li\u003e\n\u003cli\u003eDo not overload electrical outlets or extension cords.\u003c\/li\u003e\n\u003cli\u003eDisconnect the machine before removing protective covers.\u003c\/li\u003e\n\u003cli\u003eKeep all guards installed before connecting power.\u003c\/li\u003e\n\u003cli\u003eTurn the machine off and unplug it before cleaning.\u003c\/li\u003e\n\u003cli\u003eKeep hands and body parts away from moving equipment.\u003c\/li\u003e\n\u003cli\u003eAvoid loose clothing and jewelry, and confine long hair.\u003c\/li\u003e\n\u003cli\u003eWear safety glasses at all times during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwister T2 Commercial Trimmer\u003c\/li\u003e\n\u003cli\u003eStandard Stainless Steel Tumbler\u003c\/li\u003e\n\u003cli\u003eProduct Hopper for Standalone Machine Configuration\u003c\/li\u003e\n\u003cli\u003eIntegrated Safety Guarding\u003c\/li\u003e\n\u003cli\u003eMobile Wheeled Frame\u003c\/li\u003e\n\u003cli\u003eOwner's Manual and Operating Documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Leaf Collector is available as an optional configuration and is not included when the Trimmer Only option is selected.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTwister\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCommercial Wet and Dry Trimming Machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWet Throughput\u003c\/td\u003e\n\u003ctd\u003eUp to 35 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Throughput\u003c\/td\u003e\n\u003ctd\u003eUp to 11 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120V, 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Draw\u003c\/td\u003e\n\u003ctd\u003e15.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Motor\u003c\/td\u003e\n\u003ctd\u003e1 HP \/ 750W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Speed\u003c\/td\u003e\n\u003ctd\u003e1,750 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade System\u003c\/td\u003e\n\u003ctd\u003e11 StaySharp Blades\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate Cuts\u003c\/td\u003e\n\u003ctd\u003e19,250 Per Minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Motor\u003c\/td\u003e\n\u003ctd\u003e1\/30 HP \/ 25W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Speed\u003c\/td\u003e\n\u003ctd\u003e75 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Diameter\u003c\/td\u003e\n\u003ctd\u003e6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Slots\u003c\/td\u003e\n\u003ctd\u003e50 x 0.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut Height\u003c\/td\u003e\n\u003ctd\u003e0.040 in \/ 1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine Weight\u003c\/td\u003e\n\u003ctd\u003e215 lbs \/ 97.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight With Leaf Collector\u003c\/td\u003e\n\u003ctd\u003e420 lbs \/ 190 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e42.5 in \/ 107.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth With Wheels\u003c\/td\u003e\n\u003ctd\u003e27.5 in \/ 69.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e32.5 in \/ 82 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCircuit Required\u003c\/td\u003e\n\u003ctd\u003e20A \/ 120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eNEMA 5 20P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Extension Cord\u003c\/td\u003e\n\u003ctd\u003e12 AWG minimum, 25 ft maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCSA Special Inspection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Collection Systems\u003c\/td\u003e\n\u003ctd\u003eT2 Leaf Collector or T2 Trim Saver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpandable Configuration\u003c\/td\u003e\n\u003ctd\u003eUp to 3 T2 Units Inline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Twister","offers":[{"title":"Trimmer Only \/ Not Included \/ Not Included","offer_id":50068509819130,"sku":null,"price":19571.0,"currency_code":"USD","in_stock":true},{"title":"Trimmer Only \/ Add Twister T2 Trimmer Parts Kit (+$1,745) \/ Not Included","offer_id":50068509851898,"sku":null,"price":21316.0,"currency_code":"USD","in_stock":true},{"title":"Trimmer Only \/ Not Included \/ Add Twister T2 Leaf Collector Parts Kit (+$1,125)","offer_id":50068509884666,"sku":null,"price":20696.0,"currency_code":"USD","in_stock":true},{"title":"Trimmer Only \/ Add Twister T2 Trimmer Parts Kit (+$1,745) \/ Add Twister T2 Leaf Collector Parts Kit (+$1,125)","offer_id":50068509917434,"sku":null,"price":22441.0,"currency_code":"USD","in_stock":true},{"title":"Add Leaf Collector (+$2,063) \/ Not Included \/ Not Included","offer_id":50068509950202,"sku":null,"price":21634.0,"currency_code":"USD","in_stock":true},{"title":"Add Leaf Collector (+$2,063) \/ Add Twister T2 Trimmer Parts Kit (+$1,745) \/ Not Included","offer_id":50068509982970,"sku":null,"price":23379.0,"currency_code":"USD","in_stock":true},{"title":"Add Leaf Collector (+$2,063) \/ Not Included \/ Add Twister T2 Leaf Collector Parts Kit (+$1,125)","offer_id":50068510015738,"sku":null,"price":22759.0,"currency_code":"USD","in_stock":true},{"title":"Add Leaf Collector (+$2,063) \/ Add Twister T2 Trimmer Parts Kit (+$1,745) \/ Add Twister T2 Leaf Collector Parts Kit (+$1,125)","offer_id":50068510048506,"sku":null,"price":24504.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/bef5950b-a88e-49cc-8dac-3d8c5e20b622.png?v=1786654859","url":"https:\/\/cultivasupply.com\/products\/twister-t2-wet-dry-bud-trimming-machine","provider":"Cultiva Supply","version":"1.0","type":"link"}