{"product_id":"grow1-10-inch-inline-fan","title":"GROW1 10\" Inline Fan","description":"\u003cp\u003eThe GROW1 10\" Inline Fan is a high output ventilation fan built for grow rooms, larger grow tents, filtration systems, and indoor environments that require serious air movement.\u003c\/p\u003e\n\u003cp\u003eProducing 580 CFM, it delivers strong airflow for larger growing spaces, while its thermally protected AC motor and molded impeller are built to run reliably under the higher static pressure created by long duct runs, carbon filters, and multi light air cooling setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: 580 CFM Output\u003c\/li\u003e\n\u003cli\u003eDuct Size: 10 Inches\u003c\/li\u003e\n\u003cli\u003eBuild: Ceramic Coated Metal Housing\u003c\/li\u003e\n\u003cli\u003eSetup: Brackets + 8 Foot Prewired Power Cord Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned for use with standard 10 inch ducting, this fan can be configured for exhaust, intake, carbon filtration, or air cooled lighting applications. Its powerful airflow helps remove accumulated heat, exchange stale air, and maintain a more controlled growing environment.\u003c\/p\u003e\n\u003cp\u003eLike the rest of the GROW1 lineup, this fan uses a ceramic coated metal housing rather than lightweight plastic. This construction is designed to resist corrosion, withstand humid grow room conditions, and hold up to repeated use over time.\u003c\/p\u003e\n\u003cp\u003eThe fan comes with mounting brackets and an 8 foot prewired 120V power cord, allowing for a straightforward, plug and play installation without needing to source additional hardware or wiring.\u003c\/p\u003e\n\u003cp\u003eThe durable construction makes the GROW1 10\" a strong choice for growers stepping beyond smaller ventilation systems and needing greater airflow capacity for larger spaces or more demanding equipment configurations.\u003c\/p\u003e\n\u003ch3\u003e580 CFM Airflow\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 10\" Inline Fan delivers 580 CFM of airflow, suitable for larger grow rooms, grow tents, greenhouses, carbon filtration systems, and air cooled lighting setups.\u003c\/p\u003e\n\u003ch3\u003ePowerful 10 Inch Ventilation\u003c\/h3\u003e\n\u003cp\u003eThe larger 10 inch design provides high volume airflow for demanding indoor growing environments where smaller inline fans may struggle to maintain sufficient air exchange.\u003c\/p\u003e\n\u003cp\u003eIdeal applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrow rooms and larger grow tents\u003c\/li\u003e\n\u003cli\u003eExhaust ventilation\u003c\/li\u003e\n\u003cli\u003eFresh air intake\u003c\/li\u003e\n\u003cli\u003eCarbon filter systems\u003c\/li\u003e\n\u003cli\u003eAir cooled lighting\u003c\/li\u003e\n\u003cli\u003eHeat extraction\u003c\/li\u003e\n\u003cli\u003eGeneral air circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThermally Protected AC Motor\u003c\/h3\u003e\n\u003cp\u003eThe internal AC motor includes thermal protection to help guard against overheating during long duty cycles, supporting more dependable performance in ventilation systems that run continuously.\u003c\/p\u003e\n\u003ch3\u003eMolded Impeller Design\u003c\/h3\u003e\n\u003cp\u003eThe fan uses a specially molded impeller designed to maintain consistent airflow performance even under the higher static pressure created by long duct runs, carbon filters, and multi light air cooling configurations.\u003c\/p\u003e\n\u003ch3\u003eCeramic Coated Metal Housing\u003c\/h3\u003e\n\u003cp\u003eThe fan housing uses a ceramic coated metal construction rather than plastic. This is designed to provide greater resistance to corrosion, better durability in humid grow room environments, and longer service life under repeated use.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Grow Room Environments\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 Inline Fan is designed specifically around the ventilation demands of horticultural environments. Proper airflow can help manage accumulated heat, exchange stale air, support filtration, and maintain a healthier overall environment around your plants.\u003c\/p\u003e\n\u003ch3\u003eIntake or Exhaust Configuration\u003c\/h3\u003e\n\u003cp\u003eUse the GROW1 10\" Inline Fan as part of either an intake or exhaust system depending on your ventilation design. It can also be paired with compatible ducting and filtration equipment to create a complete air management system.\u003c\/p\u003e\n\u003ch3\u003eWhisper Quiet Operation\u003c\/h3\u003e\n\u003cp\u003eThe fan is optimized for high output performance without the excessive noise common in industrial fans, helping it run in the background without becoming disruptive.\u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003eThe fan includes UL recognized components and thermal protection to help prevent overheating during continuous 24\/7 operation.\u003c\/p\u003e\n\u003ch3\u003eEasy Integration\u003c\/h3\u003e\n\u003cp\u003eThe standard 10 inch connection makes the fan easy to integrate with compatible ducting, carbon filters, silencers, dampers, and other ventilation accessories.\u003c\/p\u003e\n\u003ch3\u003eRecommended Installation Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the connected ducting is 10 inches in diameter.\u003c\/li\u003e\n\u003cli\u003eInstall the fan in the correct airflow direction.\u003c\/li\u003e\n\u003cli\u003eSecure the fan using the included mounting brackets.\u003c\/li\u003e\n\u003cli\u003eSupport connected ducting independently when necessary.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs reasonably short.\u003c\/li\u003e\n\u003cli\u003eMinimize unnecessary bends.\u003c\/li\u003e\n\u003cli\u003eKeep intake and exhaust openings unobstructed.\u003c\/li\u003e\n\u003cli\u003eKeep electrical connections dry.\u003c\/li\u003e\n\u003cli\u003eClean connected filters regularly.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation Planning\u003c\/h3\u003e\n\u003cp\u003eFan performance can be affected by duct length, duct diameter, carbon filters, sharp bends, intake restrictions, and exhaust restrictions. The rated 580 CFM represents the fan’s output rating. Actual airflow within an installed system may be lower depending on overall system resistance.\u003c\/p\u003e\n\u003ch3\u003eDucting Setup\u003c\/h3\u003e\n\u003cp\u003eFor stronger ventilation performance: use properly sized 10 inch ducting, keep ducting as straight as practical, avoid crushing flexible ducting, minimize sharp turns, secure connections with appropriate clamps, and seal unwanted air leaks.\u003c\/p\u003e\n\u003ch3\u003eCarbon Filter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into compatible 10 inch filtration systems. When pairing with a carbon filter, confirm the filter uses compatible 10 inch connections, check the filter’s airflow rating against the fan’s output, account for the added airflow resistance, and support the filter independently when appropriate.\u003c\/p\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the fan from power.\u003c\/li\u003e\n\u003cli\u003eInspect the intake and exhaust openings.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect connected ducting.\u003c\/li\u003e\n\u003cli\u003eClean filters according to their manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHousing Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the ceramic coated housing with a soft, dry or lightly damp cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive scrubbing tools that could damage the coating.\u003c\/li\u003e\n\u003cli\u003eKeep the housing free from built up dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuct Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect flexible ducting periodically.\u003c\/li\u003e\n\u003cli\u003eRemove obstructions.\u003c\/li\u003e\n\u003cli\u003eCheck for loose connections.\u003c\/li\u003e\n\u003cli\u003eRepair damaged ducting.\u003c\/li\u003e\n\u003cli\u003eRemove unnecessary bends where practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFan Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeriodically inspect mounting brackets, the power cord, fan housing, duct connections, intake opening, and exhaust opening. Stop operation if electrical components or the housing show significant damage.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGROW1 10\" Inline Fan\u003c\/li\u003e\n\u003cli\u003e8 Foot Prewired Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGROW1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e10\" Inline Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e981710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHigh Output Inline Duct Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Size\u003c\/td\u003e\n\u003ctd\u003e10 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct Compatibility\u003c\/td\u003e\n\u003ctd\u003e10 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e580 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eThermally Protected AC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller\u003c\/td\u003e\n\u003ctd\u003eMolded Impeller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eCeramic Coated Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eInline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eIntake, Exhaust, Filtration, Air Cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e120V, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Length\u003c\/td\u003e\n\u003ctd\u003e8 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Type\u003c\/td\u003e\n\u003ctd\u003ePrewired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Brackets\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponents\u003c\/td\u003e\n\u003ctd\u003eUL Recognized Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14\" L × 14\" W × 9\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Room Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Tent Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GROW1","offers":[{"title":"Default Title","offer_id":50038062285050,"sku":null,"price":219.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/981712_l_6c9306cc-b3b9-42d6-81b3-696cd9a713ac.jpg?v=1786205091","url":"https:\/\/cultivasupply.com\/products\/grow1-10-inch-inline-fan","provider":"Cultiva Supply","version":"1.0","type":"link"}