{"product_id":"centurionpro-hp1-high-performance-bucker","title":"CenturionPro HP1 High-Performance Bucker","description":"\u003cp\u003eThe CenturionPro HP1 High-Performance Bucker is a commercial de-stemming machine engineered for operations that need substantially greater throughput than compact tabletop systems can provide.\u003c\/p\u003e\n\u003cp\u003eCapable of processing up to 175 pounds of wet plant material or 35 pounds of properly dried material per hour, the HP1 can replace the output of approximately five to seven manual workers. Its high-torque roller system allows operators to move through large harvest volumes while maintaining a controlled, repeatable workflow.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWet Processing Capacity: Up to 175 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eDry Processing Capacity: Up to 35 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eFeed Openings: Five Sizes up to 3\/4\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe HP1 uses two neoprene rubber rollers to grip each stem and pull it through the selected feed opening. This continuous pull-through process separates flower material quickly while reducing the repetitive effort, inconsistency, and labor requirements associated with hand bucking.\u003c\/p\u003e\n\u003cp\u003eFive feed openings accommodate stems measuring 3\/16 inch, 1\/4 inch, 3\/8 inch, 1\/2 inch, and 3\/4 inch in diameter. Operators can match each stem to the closest opening size, helping improve separation efficiency across a broad range of branch thicknesses without changing plates between batches.\u003c\/p\u003e\n\u003cp\u003eA powerful 0.75 HP gear-driven motor supplies more than 400 pounds of pulling force. The motor is rated for continuous-duty operation and includes Variable Speed Control, allowing the pull rate to be adjusted between approximately 10 and 30 inches per second.\u003c\/p\u003e\n\u003cp\u003eLower speeds provide greater control for dry, brittle, or delicate material. Higher settings increase throughput for hydrated, flexible stems and larger commercial harvest loads.\u003c\/p\u003e\n\u003cp\u003eMotor Pulse and Reverse Operation are also included. Pulse control supports short, deliberate roller movements, while reverse allows operators to release improperly fed or lodged material without immediately disassembling the processing head.\u003c\/p\u003e\n\u003cp\u003eThe HP1 includes both tabletop setup legs and a full commercial bucker stand. Operators can use the compact machine on a reinforced work surface or install it on the included stand for improved working height and facility integration.\u003c\/p\u003e\n\u003cp\u003eThe bucker stand comes equipped with industrial casters, allowing the system to be moved for cleaning, maintenance, storage, or alignment with downstream trimming equipment. Once positioned, the casters should be locked securely before operation.\u003c\/p\u003e\n\u003cp\u003eConstructed from 304 stainless steel and anodized aluminum, the HP1 is built for durability, corrosion resistance, and straightforward sanitation. Its commercial components are designed to withstand repeated harvest cycles while remaining accessible for cleaning and routine inspection.\u003c\/p\u003e\n\u003cp\u003eThe HP1 operates from standard North American 120V single-phase power and draws less than 2.5 amps during operation. A dedicated 15A circuit is required. International models operate on 240V single-phase power.\u003c\/p\u003e\n\u003cp\u003eFor operations building a complete post-harvest line, the HP1 can be positioned ahead of compatible trimming, conveying, inspection, and collection equipment. Its 175-pound wet hourly capacity makes it a strong match for medium and large trimming systems where manual stem removal would otherwise become the primary production bottleneck.\u003c\/p\u003e\n\u003cp\u003eBacked by a 5-year manufacturer warranty, the CenturionPro HP1 is designed for facilities that need powerful roller-driven processing, adjustable speed, multiple feed sizes, flexible tabletop or stand-mounted installation, and dependable commercial performance.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Roller Bucking\u003c\/h3\u003e\n\u003cp\u003eThe HP1 uses two neoprene rubber rollers to grip and pull stems through the selected feed opening. This high-performance system provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous stem feeding\u003c\/li\u003e\n\u003cli\u003eMore than 400 pounds of pulling force\u003c\/li\u003e\n\u003cli\u003eConsistent separation\u003c\/li\u003e\n\u003cli\u003eAdjustable processing speed\u003c\/li\u003e\n\u003cli\u003eWet and dry compatibility\u003c\/li\u003e\n\u003cli\u003eReduced repetitive manual labor\u003c\/li\u003e\n\u003cli\u003eCommercial-scale throughput\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUp to 175 lbs Wet Per Hour\u003c\/h3\u003e\n\u003cp\u003eThe HP1 processes up to approximately 175 lbs\/hr wet and 35 lbs\/hr dry. Actual throughput depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStem diameter\u003c\/li\u003e\n\u003cli\u003eMaterial moisture\u003c\/li\u003e\n\u003cli\u003eBranch preparation\u003c\/li\u003e\n\u003cli\u003ePlant structure\u003c\/li\u003e\n\u003cli\u003eFeed-hole selection\u003c\/li\u003e\n\u003cli\u003ePull-speed setting\u003c\/li\u003e\n\u003cli\u003eOperator experience\u003c\/li\u003e\n\u003cli\u003eMachine cleanliness\u003c\/li\u003e\n\u003cli\u003eDownstream processing capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplaces Up to 7 Manual Workers\u003c\/h3\u003e\n\u003cp\u003eUnder suitable operating conditions, the HP1 can replace the output of approximately five to seven manual workers. This allows facilities to redirect staff toward:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBranch preparation\u003c\/li\u003e\n\u003cli\u003eMaterial inspection\u003c\/li\u003e\n\u003cli\u003eMechanical trimming\u003c\/li\u003e\n\u003cli\u003eQuality control\u003c\/li\u003e\n\u003cli\u003ePackaging\u003c\/li\u003e\n\u003cli\u003eCleaning\u003c\/li\u003e\n\u003cli\u003eInventory management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFive Feed Entry Sizes\u003c\/h3\u003e\n\u003cp\u003eThe HP1 includes five feed openings: 3\/16\", 1\/4\", 3\/8\", 1\/2\", and 3\/4\". This broad range allows the machine to process delicate stems as well as thicker commercial branches without replacing the complete feed plate.\u003c\/p\u003e\n\u003ch3\u003eAccepts Stems Up to 3\/4 Inch\u003c\/h3\u003e\n\u003cp\u003eThe largest feed opening accommodates stems up to approximately 3\/4 inch in diameter. Oversized, forked, or heavily branched sections should be cut down before processing to prevent binding and maintain consistent roller performance.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Variable Speed Control\u003c\/h3\u003e\n\u003cp\u003eVariable Speed Control comes standard with the HP1. Operators can adjust the pull rate based on the moisture, thickness, and structure of the material being processed.\u003c\/p\u003e\n\u003cp\u003eLower speeds support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProperly dried material\u003c\/li\u003e\n\u003cli\u003eBrittle stems\u003c\/li\u003e\n\u003cli\u003eDelicate flower structures\u003c\/li\u003e\n\u003cli\u003eGreater operator control\u003c\/li\u003e\n\u003cli\u003eReduced breakage\u003c\/li\u003e\n\u003cli\u003eCareful separation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHigher speeds support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWet material\u003c\/li\u003e\n\u003cli\u003eFlexible stems\u003c\/li\u003e\n\u003cli\u003eDense harvest loads\u003c\/li\u003e\n\u003cli\u003eContinuous feeding\u003c\/li\u003e\n\u003cli\u003eGreater hourly throughput\u003c\/li\u003e\n\u003cli\u003eFaster commercial processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdjustable Pull Speed\u003c\/h3\u003e\n\u003cp\u003eThe HP1 provides an approximate pull-speed range of 10 inches per second at lower settings up to 30 inches per second at higher settings. Operators should begin at a slower setting and increase the speed gradually after confirming that the material separates cleanly.\u003c\/p\u003e\n\u003ch3\u003eMore Than 400 lbs of Pull Strength\u003c\/h3\u003e\n\u003cp\u003eThe roller drivetrain delivers more than 400 pounds of pulling force. This gives the HP1 the torque required to process thick stems and high-volume harvest loads without relying on manual pulling strength. Hands, tools, loose clothing, and jewelry must always remain clear of the feed openings and rollers.\u003c\/p\u003e\n\u003ch3\u003eHigh-Torque 0.75 HP Motor\u003c\/h3\u003e\n\u003cp\u003eThe HP1 uses a 0.75 HP, IP54-rated gear-driven motor operating at approximately 1,690 RPM. The motor supports continuous-duty operation, high pulling force, variable-speed processing, wet and dry material, thick commercial stems, and consistent roller movement.\u003c\/p\u003e\n\u003ch3\u003eMotor Pulse Control\u003c\/h3\u003e\n\u003cp\u003eMotor Pulse allows the rollers to move in short, controlled increments. This can help operators:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePosition difficult stems\u003c\/li\u003e\n\u003cli\u003eManage short branch sections\u003c\/li\u003e\n\u003cli\u003eClear minor feed resistance\u003c\/li\u003e\n\u003cli\u003eImprove control during setup\u003c\/li\u003e\n\u003cli\u003eReduce unnecessary continuous movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReverse Operation\u003c\/h3\u003e\n\u003cp\u003eReverse Operation allows the roller direction to be changed when necessary. This is useful for releasing lodged material, correcting an improper feed, clearing a branch safely, reducing unnecessary disassembly, and restoring normal workflow. Reverse mode should only be used according to the owner’s manual.\u003c\/p\u003e\n\u003ch3\u003eNeoprene Rubber Rollers\u003c\/h3\u003e\n\u003cp\u003eThe HP1 uses a dual-roller set manufactured from neoprene rubber. Neoprene provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong stem grip\u003c\/li\u003e\n\u003cli\u003eControlled pulling action\u003c\/li\u003e\n\u003cli\u003eReliable wet and dry performance\u003c\/li\u003e\n\u003cli\u003eReduced metal-to-material contact\u003c\/li\u003e\n\u003cli\u003eCommercial durability\u003c\/li\u003e\n\u003cli\u003eReplaceable wear surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWet and Dry Processing\u003c\/h3\u003e\n\u003cp\u003eThe HP1 is designed to process both wet and properly dried plant material. Wet stems are generally more flexible and can support faster pull rates. Dry stems require slower feeding and greater care to reduce breakage and protect the finished material.\u003c\/p\u003e\n\u003ch3\u003eContinuous-Duty Operation\u003c\/h3\u003e\n\u003cp\u003eThe HP1 is built for continuous commercial harvest cycles. Its motor, roller system, and drivetrain support extended operation when the machine is cleaned, inspected, and maintained according to manufacturer instructions.\u003c\/p\u003e\n\u003ch3\u003eTabletop and Stand-Mounted Operation\u003c\/h3\u003e\n\u003cp\u003eThe HP1 includes both tabletop setup legs and a full commercial bucker stand. The tabletop configuration provides a smaller footprint for facilities with reinforced work surfaces. The stand-mounted configuration provides improved working height, easier mobility, and better integration into a permanent processing line.\u003c\/p\u003e\n\u003ch3\u003eIncluded Commercial Bucker Stand\u003c\/h3\u003e\n\u003cp\u003eThe included stand provides stable operating height, structural support, better operator ergonomics, space for material collection, easier workflow integration, and mobile facility placement.\u003c\/p\u003e\n\u003ch3\u003eIndustrial Casters\u003c\/h3\u003e\n\u003cp\u003eThe stand is mounted on industrial casters. This allows the HP1 to be repositioned within the facility, moved for cleaning, rolled into storage, aligned with downstream equipment, shifted for maintenance, and locked securely during operation. All caster locks should be engaged before startup.\u003c\/p\u003e\n\u003ch3\u003eOptional Off-Road Wheel Assembly\u003c\/h3\u003e\n\u003cp\u003eAn Off-Road Wheel Assembly Kit may be available for facilities that need to move the HP1 over rougher terrain or between field and indoor processing areas. This upgrade provides greater mobility than standard industrial casters but does not eliminate the need for a stable, level operating surface.\u003c\/p\u003e\n\u003ch3\u003eCommercial-Grade Construction\u003c\/h3\u003e\n\u003cp\u003eThe HP1 is built primarily from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless steel\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum\u003c\/li\u003e\n\u003cli\u003eNeoprene rubber rollers\u003c\/li\u003e\n\u003cli\u003eCommercial bearings\u003c\/li\u003e\n\u003cli\u003eGear-driven motor components\u003c\/li\u003e\n\u003cli\u003eHeavy-duty stand hardware\u003c\/li\u003e\n\u003cli\u003eIndustrial caster assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese materials support regular cleaning, corrosion resistance, and repeated commercial use.\u003c\/p\u003e\n\u003ch3\u003eStandard 120V Operation\u003c\/h3\u003e\n\u003cp\u003eNorth American electrical requirements include 120V, 60 Hz, single phase, approximately 5A rated input, less than 2.5A operating draw, and a 15A circuit breaker. International requirements include 240V, 50 Hz, single phase, approximately 2.5A rated input, and a 15A circuit breaker. Installation must follow manufacturer instructions and applicable electrical codes.\u003c\/p\u003e\n\u003ch3\u003eExtension Cord Requirements\u003c\/h3\u003e\n\u003cp\u003eWhen an extension cord is necessary, the manufacturer specifies a minimum of 14 AWG and a maximum length of 25 feet. Using an undersized or excessively long cord may result in voltage loss, overheating, or inconsistent motor performance.\u003c\/p\u003e\n\u003ch3\u003eCompliance-Focused Design\u003c\/h3\u003e\n\u003cp\u003eThe supplied manufacturer information identifies the HP1 as GMP compliant, UL compliant, CE compliant, and RoHS compliant. Facilities should still verify all local electrical, workplace, sanitation, and processing requirements before installation.\u003c\/p\u003e\n\u003ch3\u003eStreamlined Processing Integration\u003c\/h3\u003e\n\u003cp\u003eThe HP1 can be positioned at the beginning of a larger processing workflow. A typical setup may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBranch preparation\u003c\/li\u003e\n\u003cli\u003eHP1 de-stemming\u003c\/li\u003e\n\u003cli\u003eMaterial collection\u003c\/li\u003e\n\u003cli\u003eVisual inspection\u003c\/li\u003e\n\u003cli\u003eMechanical trimming\u003c\/li\u003e\n\u003cli\u003eFinal quality control\u003c\/li\u003e\n\u003cli\u003ePackaging and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBalancing the HP1 with the capacity of downstream equipment helps prevent production bottlenecks.\u003c\/p\u003e\n\u003ch3\u003eOptional HP1 Parts Kit\u003c\/h3\u003e\n\u003cp\u003eThe HP1 Parts Kit helps facilities keep critical replacement components available during harvest. The shared HP1\/HP3 kit may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo HP roller assemblies\u003c\/li\u003e\n\u003cli\u003eFive front cut-plate assemblies\u003c\/li\u003e\n\u003cli\u003eTwo compression springs\u003c\/li\u003e\n\u003cli\u003eOne 25-tooth spur gear\u003c\/li\u003e\n\u003cli\u003eOne 25-tooth no-collar spur gear\u003c\/li\u003e\n\u003cli\u003eTwo HP slide bearings\u003c\/li\u003e\n\u003cli\u003eOne parts assembly kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeeping these components available can reduce downtime during cleaning, routine wear, or maintenance. Selectable above.\u003c\/p\u003e\n\u003ch3\u003eRecommended Operating Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRead the complete owner’s manual before operation.\u003c\/li\u003e\n\u003cli\u003eConfirm that the work surface or included stand is stable.\u003c\/li\u003e\n\u003cli\u003eLock all caster wheels before startup.\u003c\/li\u003e\n\u003cli\u003eInspect the rollers before every shift.\u003c\/li\u003e\n\u003cli\u003eConfirm all guards, covers, and feed components are installed.\u003c\/li\u003e\n\u003cli\u003eSet the Variable Speed Control to a lower setting before startup.\u003c\/li\u003e\n\u003cli\u003eSelect the feed opening closest to the stem diameter.\u003c\/li\u003e\n\u003cli\u003eRemove stems larger than 3\/4 inch.\u003c\/li\u003e\n\u003cli\u003eCut heavily forked branches into manageable sections.\u003c\/li\u003e\n\u003cli\u003eApply steady, controlled feed pressure.\u003c\/li\u003e\n\u003cli\u003eAllow the rollers to pull the stem naturally.\u003c\/li\u003e\n\u003cli\u003eNever force oversized material through the machine.\u003c\/li\u003e\n\u003cli\u003eKeep hands and tools away from the rollers and feed openings.\u003c\/li\u003e\n\u003cli\u003eSecure loose clothing, jewelry, and long hair.\u003c\/li\u003e\n\u003cli\u003eStop the machine if unusual resistance, noise, or vibration develops.\u003c\/li\u003e\n\u003cli\u003eUse Motor Pulse and Reverse only as directed.\u003c\/li\u003e\n\u003cli\u003eDisconnect electrical power before cleaning or maintenance.\u003c\/li\u003e\n\u003cli\u003eUse only a 14 AWG or heavier extension cord.\u003c\/li\u003e\n\u003cli\u003eKeep extension cords at or below 25 feet.\u003c\/li\u003e\n\u003cli\u003eClean the feed plate and rollers after every operating session.\u003c\/li\u003e\n\u003cli\u003eAllow washed components to dry completely before restarting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePreparing Stems\u003c\/h3\u003e\n\u003cp\u003eProper preparation improves throughput and finished quality. Before processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove oversized branches.\u003c\/li\u003e\n\u003cli\u003eCut long stems into manageable lengths.\u003c\/li\u003e\n\u003cli\u003eRemove foreign objects.\u003c\/li\u003e\n\u003cli\u003eSeparate heavily tangled branches.\u003c\/li\u003e\n\u003cli\u003eGroup stems by approximate diameter.\u003c\/li\u003e\n\u003cli\u003eSelect the closest feed opening.\u003c\/li\u003e\n\u003cli\u003eTest a small quantity before full production.\u003c\/li\u003e\n\u003cli\u003eConfirm no stem exceeds 3\/4 inch in diameter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSelecting the Feed Opening\u003c\/h3\u003e\n\u003cp\u003eUse the feed opening that most closely matches the stem diameter.\u003c\/p\u003e\n\u003cp\u003eAn opening that is too small may:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequire excessive force\u003c\/li\u003e\n\u003cli\u003eCause the stem to bind\u003c\/li\u003e\n\u003cli\u003eIncrease roller strain\u003c\/li\u003e\n\u003cli\u003eSlow processing\u003c\/li\u003e\n\u003cli\u003eDamage finished material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn opening that is too large may:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduce separation efficiency\u003c\/li\u003e\n\u003cli\u003eLeave material attached\u003c\/li\u003e\n\u003cli\u003eProduce inconsistent results\u003c\/li\u003e\n\u003cli\u003eAllow the stem to move unpredictably\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeeding Technique\u003c\/h3\u003e\n\u003cp\u003eHold the stem securely and align it with the selected opening. Guide the stem toward the rollers and allow the drivetrain to pull it through. Avoid:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWrapping stems around your hand\u003c\/li\u003e\n\u003cli\u003eJerking the branch\u003c\/li\u003e\n\u003cli\u003eTwisting aggressively\u003c\/li\u003e\n\u003cli\u003eFeeding tangled material\u003c\/li\u003e\n\u003cli\u003eForcing oversized stems\u003c\/li\u003e\n\u003cli\u003ePlacing fingers near the feed opening\u003c\/li\u003e\n\u003cli\u003eContinuing if the stem becomes lodged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetting the Pull Speed\u003c\/h3\u003e\n\u003cp\u003eBegin at a lower speed. Increase the Variable Speed Control gradually after confirming the material is separating correctly. The ideal speed depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWet or dry condition\u003c\/li\u003e\n\u003cli\u003eStem diameter\u003c\/li\u003e\n\u003cli\u003ePlant density\u003c\/li\u003e\n\u003cli\u003eMaterial structure\u003c\/li\u003e\n\u003cli\u003eDesired finished quality\u003c\/li\u003e\n\u003cli\u003eOperator experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDocumenting successful settings can improve consistency across future batches.\u003c\/p\u003e\n\u003ch3\u003eWet Material Processing\u003c\/h3\u003e\n\u003cp\u003eWet stems are generally flexible and can tolerate faster roller speeds. For wet processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the closest feed opening.\u003c\/li\u003e\n\u003cli\u003eBegin at a moderate speed.\u003c\/li\u003e\n\u003cli\u003eIncrease speed gradually.\u003c\/li\u003e\n\u003cli\u003eAvoid compressing flower clusters.\u003c\/li\u003e\n\u003cli\u003eMonitor the rollers for buildup.\u003c\/li\u003e\n\u003cli\u003eKeep the collection area clear.\u003c\/li\u003e\n\u003cli\u003eClean periodically during extended shifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDry Material Processing\u003c\/h3\u003e\n\u003cp\u003eProperly dried stems require greater control. For dry processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin at the lowest practical speed.\u003c\/li\u003e\n\u003cli\u003eUse the closest feed-hole size.\u003c\/li\u003e\n\u003cli\u003eAvoid excessively brittle stems.\u003c\/li\u003e\n\u003cli\u003eTest a small batch first.\u003c\/li\u003e\n\u003cli\u003eStop if excessive breakage develops.\u003c\/li\u003e\n\u003cli\u003eClean dry buildup regularly.\u003c\/li\u003e\n\u003cli\u003eInspect finished material frequently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTabletop Setup\u003c\/h3\u003e\n\u003cp\u003eWhen using the tabletop legs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoose a reinforced, stable work surface.\u003c\/li\u003e\n\u003cli\u003eConfirm the table can support the machine’s weight and operating forces.\u003c\/li\u003e\n\u003cli\u003eKeep the work surface level.\u003c\/li\u003e\n\u003cli\u003ePrevent the machine from shifting.\u003c\/li\u003e\n\u003cli\u003eMaintain clear space around the operator.\u003c\/li\u003e\n\u003cli\u003eDo not use a lightweight folding table.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before repositioning the machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStand Setup\u003c\/h3\u003e\n\u003cp\u003eWhen using the included stand:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAssemble it according to the owner’s manual.\u003c\/li\u003e\n\u003cli\u003eConfirm all hardware is tight.\u003c\/li\u003e\n\u003cli\u003eSecure the bucker to the stand.\u003c\/li\u003e\n\u003cli\u003ePosition the stand on a level floor.\u003c\/li\u003e\n\u003cli\u003eLock every caster before operation.\u003c\/li\u003e\n\u003cli\u003eVerify the stand does not rock or shift.\u003c\/li\u003e\n\u003cli\u003eReinspect mounting hardware regularly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleaning \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning After Each Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the HP1 from electrical power.\u003c\/li\u003e\n\u003cli\u003eAllow the motor and rollers to stop completely.\u003c\/li\u003e\n\u003cli\u003eRemove loose plant material.\u003c\/li\u003e\n\u003cli\u003eClear all five feed openings.\u003c\/li\u003e\n\u003cli\u003eBrush debris from the roller set.\u003c\/li\u003e\n\u003cli\u003eWipe accessible stainless steel and aluminum surfaces.\u003c\/li\u003e\n\u003cli\u003eClean the tabletop legs or stand.\u003c\/li\u003e\n\u003cli\u003eRemove debris from the caster wheels.\u003c\/li\u003e\n\u003cli\u003eAllow all components to dry completely.\u003c\/li\u003e\n\u003cli\u003eDo not reconnect power until the machine is dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRoller Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect electrical power.\u003c\/li\u003e\n\u003cli\u003eRemove loose buildup using a soft brush.\u003c\/li\u003e\n\u003cli\u003eWipe the neoprene rollers with an approved cleaner.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp metal tools.\u003c\/li\u003e\n\u003cli\u003eInspect for cracks, flat spots, or excessive wear.\u003c\/li\u003e\n\u003cli\u003eReplace damaged rollers with approved components.\u003c\/li\u003e\n\u003cli\u003eConfirm both rollers move evenly before operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeed Plate Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear material from all five feed openings.\u003c\/li\u003e\n\u003cli\u003eInspect the feed plate for damage or deformation.\u003c\/li\u003e\n\u003cli\u003eNever insert hands into an energized machine.\u003c\/li\u003e\n\u003cli\u003eUse approved tools only after disconnecting power.\u003c\/li\u003e\n\u003cli\u003eConfirm each opening is unobstructed before startup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Speed Control Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the control enclosure clean and dry.\u003c\/li\u003e\n\u003cli\u003eDo not spray water directly onto the controls.\u003c\/li\u003e\n\u003cli\u003eInspect the speed dial and electrical connections regularly.\u003c\/li\u003e\n\u003cli\u003eStop operating if speed becomes inconsistent.\u003c\/li\u003e\n\u003cli\u003eDo not modify the control enclosure.\u003c\/li\u003e\n\u003cli\u003eHave electrical repairs completed by qualified personnel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMotor and Drive Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the motor and drivetrain regularly.\u003c\/li\u003e\n\u003cli\u003eListen for unusual noise.\u003c\/li\u003e\n\u003cli\u003eCheck for vibration, slipping, or uneven operation.\u003c\/li\u003e\n\u003cli\u003eRemove buildup near moving components.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003cli\u003eReplace worn parts with approved CenturionPro components.\u003c\/li\u003e\n\u003cli\u003eHave major repairs performed by qualified technicians.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMotor Pulse and Reverse Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTest pulse and reverse functions according to manufacturer guidance.\u003c\/li\u003e\n\u003cli\u003eStop using the machine if either control responds inconsistently.\u003c\/li\u003e\n\u003cli\u003eKeep control switches dry.\u003c\/li\u003e\n\u003cli\u003eNever use reverse while hands or tools are near the feed opening.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before inspecting control wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGear and Bearing Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect spur gears and slide bearings regularly.\u003c\/li\u003e\n\u003cli\u003eCheck for unusual wear or looseness.\u003c\/li\u003e\n\u003cli\u003eRemove debris that could interfere with movement.\u003c\/li\u003e\n\u003cli\u003eReplace worn gears, springs, or bearings promptly.\u003c\/li\u003e\n\u003cli\u003eDo not operate the HP1 with damaged drivetrain components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStand and Caster Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove plant material from the stand after each use.\u003c\/li\u003e\n\u003cli\u003eWipe down the frame.\u003c\/li\u003e\n\u003cli\u003eInspect all fasteners.\u003c\/li\u003e\n\u003cli\u003eConfirm each caster lock works correctly.\u003c\/li\u003e\n\u003cli\u003eRemove debris from the wheels.\u003c\/li\u003e\n\u003cli\u003eReplace damaged wheels, locks, or hardware before operating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExterior Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect electrical power.\u003c\/li\u003e\n\u003cli\u003eWipe exterior surfaces using a lightly dampened cloth.\u003c\/li\u003e\n\u003cli\u003eDo not spray water into the motor, controls, bearings, or wiring.\u003c\/li\u003e\n\u003cli\u003eDo not submerge any part of the machine.\u003c\/li\u003e\n\u003cli\u003eDry all surfaces before storage or reuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean and dry the HP1 before storage.\u003c\/li\u003e\n\u003cli\u003eDisconnect and secure the power cord.\u003c\/li\u003e\n\u003cli\u003eLock the caster wheels when stored on the stand.\u003c\/li\u003e\n\u003cli\u003eStore indoors in a dry location.\u003c\/li\u003e\n\u003cli\u003eKeep every feed opening clear.\u003c\/li\u003e\n\u003cli\u003eProtect the rollers from deformation.\u003c\/li\u003e\n\u003cli\u003eDo not place heavy objects on the machine.\u003c\/li\u003e\n\u003cli\u003eProtect the Variable Speed Control from impact and moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProfessional Warranty Coverage\u003c\/h3\u003e\n\u003cp\u003eThe CenturionPro HP1 includes a 5-year manufacturer warranty covering qualifying parts proven defective in materials or workmanship under normal operating conditions. The warranty period begins on the date of purchase by the original purchaser.\u003c\/p\u003e\n\u003cp\u003ePotential exclusions may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNormal wear\u003c\/li\u003e\n\u003cli\u003eImproper operation\u003c\/li\u003e\n\u003cli\u003eInsufficient maintenance\u003c\/li\u003e\n\u003cli\u003eElectrical damage\u003c\/li\u003e\n\u003cli\u003eAccidental damage\u003c\/li\u003e\n\u003cli\u003eUnauthorized modifications\u003c\/li\u003e\n\u003cli\u003eConsumable components\u003c\/li\u003e\n\u003cli\u003eDamage caused by improper cleaning\u003c\/li\u003e\n\u003cli\u003eReturn shipping costs for warranty evaluation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeep proof of purchase and follow all manufacturer registration, maintenance, and warranty-claim procedures.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the HP1 High-Performance Bucker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWet Processing Capacity: Up to 175 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eDry Processing Capacity: Up to 35 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eFeed Openings: Five Sizes up to 3\/4\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 5-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCenturionPro HP1 Bucker\u003c\/li\u003e\n\u003cli\u003e0.75 HP Gear-Driven Motor\u003c\/li\u003e\n\u003cli\u003eDual Neoprene Rubber Roller System\u003c\/li\u003e\n\u003cli\u003eFive Feed Entry Sizes\u003c\/li\u003e\n\u003cli\u003eIntegrated Variable Speed Control\u003c\/li\u003e\n\u003cli\u003eMotor Pulse Control\u003c\/li\u003e\n\u003cli\u003eReverse Operation\u003c\/li\u003e\n\u003cli\u003eTabletop Setup Legs\u003c\/li\u003e\n\u003cli\u003eCommercial Bucker Stand\u003c\/li\u003e\n\u003cli\u003eIndustrial Locking Casters\u003c\/li\u003e\n\u003cli\u003ePower Cord\u003c\/li\u003e\n\u003cli\u003eOwner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCenturionPro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHP1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Numbers\u003c\/td\u003e\n\u003ctd\u003eCP-7000 \/ CP-7008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHigh-Performance Roller Bucker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Method\u003c\/td\u003e\n\u003ctd\u003eVariable-Speed Dual-Roller Pull-Through De-Stemming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Material\u003c\/td\u003e\n\u003ctd\u003eWet and Properly Dried Plant Material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWet Processing Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 175 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Processing Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 35 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHuman Workers Replaced\u003c\/td\u003e\n\u003ctd\u003eApproximately 5–7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Workstations\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed Entry Sizes\u003c\/td\u003e\n\u003ctd\u003e3\/16\", 1\/4\", 3\/8\", 1\/2\", and 3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Stem Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Sets\u003c\/td\u003e\n\u003ctd\u003eNeoprene Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePull Speed\u003c\/td\u003e\n\u003ctd\u003eApproximately 10–30 in\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePull Strength\u003c\/td\u003e\n\u003ctd\u003eMore Than 400 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Motor\u003c\/td\u003e\n\u003ctd\u003e0.75 HP, IP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003eApproximately 1,690 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable Speed Control\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Pulse\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReverse Operation\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuty Cycle\u003c\/td\u003e\n\u003ctd\u003eContinuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Input\u003c\/td\u003e\n\u003ctd\u003e120V, 60 Hz, Single Phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Rated Input\u003c\/td\u003e\n\u003ctd\u003eApproximately 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Operating Current\u003c\/td\u003e\n\u003ctd\u003eLess Than 2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Circuit Requirement\u003c\/td\u003e\n\u003ctd\u003e15A at 120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Input\u003c\/td\u003e\n\u003ctd\u003e240V, 50 Hz, Single Phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Rated Input\u003c\/td\u003e\n\u003ctd\u003eApproximately 2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Circuit Requirement\u003c\/td\u003e\n\u003ctd\u003e15A at 220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Extension Cord\u003c\/td\u003e\n\u003ctd\u003e14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Extension Cord Length\u003c\/td\u003e\n\u003ctd\u003e25 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Materials\u003c\/td\u003e\n\u003ctd\u003e304 Stainless Steel and Anodized Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTabletop Dimensions\u003c\/td\u003e\n\u003ctd\u003e24\" L × 18\" W × 22\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTabletop Weight\u003c\/td\u003e\n\u003ctd\u003eApproximately 100 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions With Stand\u003c\/td\u003e\n\u003ctd\u003e37\" L × 32.5\" W × 59\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight With Stand\u003c\/td\u003e\n\u003ctd\u003eApproximately 198 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTabletop Legs\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommercial Stand\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial Casters\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOff-Road Wheel Kit Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMP Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCE Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"CenturionPro","offers":[{"title":"Not Included","offer_id":49983979880698,"sku":null,"price":4995.0,"currency_code":"USD","in_stock":true},{"title":"Add Parts Kit (+$3780.00)","offer_id":49983979913466,"sku":null,"price":8775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/1_1800x1800_CPro-Buckers-HP1-withstand.webp?v=1785889819","url":"https:\/\/cultivasupply.com\/products\/centurionpro-hp1-high-performance-bucker","provider":"Cultiva Supply","version":"1.0","type":"link"}