{"product_id":"centurionpro-hp-tabletop-bucker","title":"CenturionPro HP TableTop Bucker","description":"\u003cp\u003eThe CenturionPro HP TableTop Bucker delivers high-capacity de-stemming performance in a compact machine designed for workbenches, counters, and smaller processing rooms.\u003c\/p\u003e\n\u003cp\u003eCapable of processing up to 75 pounds of wet material or 15 pounds of properly dried material per hour, the HP TableTop dramatically reduces repetitive manual labor while maintaining the control needed to protect finished crop quality.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWet Processing Capacity: Up to 75 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eDry Processing Capacity: Up to 15 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eSpeed Control: Adjustable 10–30 in\/sec Pull Rate\u003c\/li\u003e\n\u003cli\u003eWarranty: 2-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTwo neoprene rubber rollers grip the branch and pull it through the selected feed opening, separating flower material from the stem at a consistent rate. This high-pull design is ideal for operators who need substantially greater throughput than hand de-stemming can provide without installing a large floor-standing bucker.\u003c\/p\u003e\n\u003cp\u003eThe HP TableTop includes two feed openings measuring 1\/4 inch and 3\/8 inch. Operators can select the opening that best matches the branch diameter, helping improve separation quality while reducing unnecessary compression or damage.\u003c\/p\u003e\n\u003cp\u003eIntegrated Variable Speed Control allows the pull rate to be adjusted between approximately 10 and 30 inches per second. Lower speeds provide greater control for delicate or properly dried material, while higher speeds maximize throughput for wet, flexible branches.\u003c\/p\u003e\n\u003cp\u003eThe current manufacturer specifications identify a continuous-duty 0.33 HP motor operating at approximately 1,690 RPM. The pulling system delivers more than 300 pounds of pull strength, providing the torque required to process substantial harvest volumes in a compact tabletop format.\u003c\/p\u003e\n\u003cp\u003eDespite its output, the HP TableTop requires only standard electrical service. It operates on 120V single-phase power in North America and draws less than 3 amps during operation. International models operate on 240V and draw less than 1.5 amps.\u003c\/p\u003e\n\u003cp\u003eThe machine measures approximately 18 inches long, 15 inches wide, and 17 inches high, allowing it to fit on existing work surfaces. At approximately 50 pounds, it remains portable enough to move between stations while providing a stable platform during operation.\u003c\/p\u003e\n\u003cp\u003eA centered carrying handle supports easier repositioning throughout the facility. For a more permanent and ergonomic processing station, the optional HPTT Bucker Stand raises the machine to a practical working height and helps integrate it with compatible trimming equipment.\u003c\/p\u003e\n\u003cp\u003eBuilt from 304 stainless steel and aluminum, the HP TableTop is engineered for repeated cleaning, corrosion resistance, and dependable commercial use. Its compact mechanical design also simplifies inspection and routine maintenance.\u003c\/p\u003e\n\u003cp\u003eThe machine is designed for continuous-duty operation and can process both wet and properly dried branches. Variable Speed Control gives operators the flexibility to slow the rollers for brittle material or increase the pull rate when working with hydrated branches.\u003c\/p\u003e\n\u003cp\u003eBacked by a 2-year manufacturer warranty, the CenturionPro HP TableTop Bucker is ideal for small commercial operations, boutique producers, and facilities that need high throughput without giving up valuable floor space.\u003c\/p\u003e\n\u003ch3\u003eHigh-Performance Roller Bucking\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop uses two neoprene rubber rollers to grip the branch and pull it through the selected feed opening. This roller-driven design provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent pulling force\u003c\/li\u003e\n\u003cli\u003eFast stem removal\u003c\/li\u003e\n\u003cli\u003eControlled material feeding\u003c\/li\u003e\n\u003cli\u003eReliable wet and dry processing\u003c\/li\u003e\n\u003cli\u003eReduced repetitive hand labor\u003c\/li\u003e\n\u003cli\u003eContinuous commercial operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUp to 75 lbs Wet Per Hour\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop processes up to approximately 75 lbs\/hr wet and 15 lbs\/hr dry. Actual throughput depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBranch diameter\u003c\/li\u003e\n\u003cli\u003eMaterial moisture\u003c\/li\u003e\n\u003cli\u003ePlant structure\u003c\/li\u003e\n\u003cli\u003eOperator technique\u003c\/li\u003e\n\u003cli\u003eFeed speed\u003c\/li\u003e\n\u003cli\u003ePreparation quality\u003c\/li\u003e\n\u003cli\u003eMachine cleanliness\u003c\/li\u003e\n\u003cli\u003eDownstream workflow capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntegrated Variable Speed Control\u003c\/h3\u003e\n\u003cp\u003eVariable Speed Control is included as standard equipment. Operators can adjust the roller pull rate to match the material being processed.\u003c\/p\u003e\n\u003cp\u003eLower speeds support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProperly dried material\u003c\/li\u003e\n\u003cli\u003eDelicate plant structures\u003c\/li\u003e\n\u003cli\u003eGreater operator control\u003c\/li\u003e\n\u003cli\u003eReduced breakage\u003c\/li\u003e\n\u003cli\u003eCareful separation\u003c\/li\u003e\n\u003cli\u003eSmaller branches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHigher speeds support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWet material\u003c\/li\u003e\n\u003cli\u003eFlexible branches\u003c\/li\u003e\n\u003cli\u003eGreater hourly throughput\u003c\/li\u003e\n\u003cli\u003eFaster continuous feeding\u003c\/li\u003e\n\u003cli\u003eHigh-volume processing\u003c\/li\u003e\n\u003cli\u003eDenser harvest loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdjustable Pull Speed\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop provides an approximate pull-speed range of 10 inches per second at lower settings up to 30 inches per second at higher settings. Operators should begin at a slower speed and increase the setting gradually after observing how the material responds.\u003c\/p\u003e\n\u003ch3\u003eMore Than 300 lbs of Pull Strength\u003c\/h3\u003e\n\u003cp\u003eThe roller system produces more than 300 pounds of pulling force. This high torque allows the compact machine to process substantial branch volumes without requiring the physical effort associated with manual de-stemming. Operators should never attempt to stop or interfere with the rollers by hand.\u003c\/p\u003e\n\u003ch3\u003eDual Feed Openings\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop includes two feed openings: 1\/4\" and 3\/8\". Selecting the opening that most closely matches the branch diameter helps improve separation while reducing unnecessary damage.\u003c\/p\u003e\n\u003ch3\u003eWet and Dry Processing\u003c\/h3\u003e\n\u003cp\u003eThe machine is designed to process both wet and properly dried plant material. Wet material is generally more flexible and supports faster pull speeds. Dry material should be processed more slowly to reduce breakage and protect delicate flower structure.\u003c\/p\u003e\n\u003ch3\u003eContinuous-Duty Operation\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop is designed for continuous commercial processing. Its duty cycle supports extended harvest sessions, provided the machine is inspected, cleaned, and maintained according to manufacturer instructions.\u003c\/p\u003e\n\u003ch3\u003eCompact Tabletop Design\u003c\/h3\u003e\n\u003cp\u003eThe machine measures approximately 18 inches long, 15 inches wide, and 17 inches high. Its compact footprint allows it to fit on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard workbenches\u003c\/li\u003e\n\u003cli\u003eProcessing tables\u003c\/li\u003e\n\u003cli\u003eCounter-height stations\u003c\/li\u003e\n\u003cli\u003eCompact production lines\u003c\/li\u003e\n\u003cli\u003eMobile work surfaces\u003c\/li\u003e\n\u003cli\u003eLimited-space harvest rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePortable Carrying Handle\u003c\/h3\u003e\n\u003cp\u003eA sturdy carrying handle makes it easier to reposition the HP TableTop between workstations. Before moving the machine:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect electrical power.\u003c\/li\u003e\n\u003cli\u003eConfirm all moving components have stopped.\u003c\/li\u003e\n\u003cli\u003eRemove loose material.\u003c\/li\u003e\n\u003cli\u003eSecure the power cord.\u003c\/li\u003e\n\u003cli\u003eLift using proper technique.\u003c\/li\u003e\n\u003cli\u003ePlace the machine on a stable surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional HPTT Bucker Stand\u003c\/h3\u003e\n\u003cp\u003eThe optional HPTT Bucker Stand creates a dedicated floor-standing workstation. The stand helps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImprove operator ergonomics\u003c\/li\u003e\n\u003cli\u003eCreate a stable working height\u003c\/li\u003e\n\u003cli\u003eIntegrate the bucker with trimming equipment\u003c\/li\u003e\n\u003cli\u003eReduce countertop requirements\u003c\/li\u003e\n\u003cli\u003eImprove workflow organization\u003c\/li\u003e\n\u003cli\u003eSupport a more permanent processing station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSelectable above.\u003c\/p\u003e\n\u003ch3\u003eNeoprene Rubber Roller Set\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop uses neoprene rubber rollers to grip and pull branches through the machine. Neoprene provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong branch grip\u003c\/li\u003e\n\u003cli\u003eControlled feeding\u003c\/li\u003e\n\u003cli\u003eDurable commercial performance\u003c\/li\u003e\n\u003cli\u003eReduced metal-to-material contact\u003c\/li\u003e\n\u003cli\u003eReliable wet and dry processing\u003c\/li\u003e\n\u003cli\u003eReplaceable wear components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIndustrial 0.33 HP Motor\u003c\/h3\u003e\n\u003cp\u003eThe current manufacturer specifications identify a 0.33 HP, IP54-rated drive motor operating at approximately 1,690 RPM. The motor provides the torque required for continuous operation, adjustable pull speeds, wet and dry processing, dense branch loads, high hourly throughput, and consistent roller movement.\u003c\/p\u003e\n\u003ch3\u003eStandard Electrical Operation\u003c\/h3\u003e\n\u003cp\u003eNorth American operation requires 120V, 60 Hz, single phase, less than 3 amps operating, and a 15A circuit breaker. International operation requires 240V, 50 Hz, single phase, less than 1.5 amps operating, and a 15A circuit breaker. The manufacturer states that the machine is not GFCI compatible.\u003c\/p\u003e\n\u003ch3\u003eExtension Cord Requirements\u003c\/h3\u003e\n\u003cp\u003eWhen an extension cord is necessary, the manufacturer specifies a minimum of 14 AWG and a maximum length of 25 feet. Using an undersized or excessively long cord may cause voltage loss, overheating, or inconsistent machine performance.\u003c\/p\u003e\n\u003ch3\u003eCommercial-Grade Construction\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop is manufactured primarily from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 stainless steel\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003cli\u003eNeoprene rubber rollers\u003c\/li\u003e\n\u003cli\u003eCommercial electrical components\u003c\/li\u003e\n\u003cli\u003eIndustrial drive hardware\u003c\/li\u003e\n\u003cli\u003eDurable feed components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese materials support repeated cleaning and dependable long-term use.\u003c\/p\u003e\n\u003ch3\u003eCompliance-Focused Design\u003c\/h3\u003e\n\u003cp\u003eThe supplied manufacturer specifications identify the HP TableTop as GMP compliant, UL compliant, CE compliant, and RoHS compliant. Operators should still confirm all applicable local electrical, workplace, and facility requirements.\u003c\/p\u003e\n\u003ch3\u003eStreamlined Harvest Integration\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop can be positioned before a compatible trimming machine to create a more efficient harvest workflow. A typical setup may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBranch preparation\u003c\/li\u003e\n\u003cli\u003eHP TableTop de-stemming\u003c\/li\u003e\n\u003cli\u003eMaterial inspection\u003c\/li\u003e\n\u003cli\u003eMechanical trimming\u003c\/li\u003e\n\u003cli\u003eFinal quality control\u003c\/li\u003e\n\u003cli\u003eCollection and storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe optional stand helps align the bucker with compatible CenturionPro tabletop trimming equipment.\u003c\/p\u003e\n\u003ch3\u003eReduced Manual Labor\u003c\/h3\u003e\n\u003cp\u003eThe HP TableTop can replace approximately four manual workers under suitable conditions. This allows production teams to redirect labor toward:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBranch preparation\u003c\/li\u003e\n\u003cli\u003eMaterial inspection\u003c\/li\u003e\n\u003cli\u003eTrimming\u003c\/li\u003e\n\u003cli\u003ePackaging\u003c\/li\u003e\n\u003cli\u003eEquipment cleaning\u003c\/li\u003e\n\u003cli\u003eInventory control\u003c\/li\u003e\n\u003cli\u003eFinal quality assurance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Operating Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRead the complete owner’s manual before operating.\u003c\/li\u003e\n\u003cli\u003ePosition the machine on a stable, level work surface.\u003c\/li\u003e\n\u003cli\u003eConfirm the optional stand is assembled securely before use.\u003c\/li\u003e\n\u003cli\u003eInspect the rollers and feed openings before every shift.\u003c\/li\u003e\n\u003cli\u003eConfirm all guards and covers are installed.\u003c\/li\u003e\n\u003cli\u003eVerify the Variable Speed Control is set low before startup.\u003c\/li\u003e\n\u003cli\u003eSelect the feed opening that best matches the branch.\u003c\/li\u003e\n\u003cli\u003eRemove oversized stems before loading.\u003c\/li\u003e\n\u003cli\u003eApply steady, controlled feed pressure.\u003c\/li\u003e\n\u003cli\u003eAllow the rollers to pull the branch naturally.\u003c\/li\u003e\n\u003cli\u003eDo not force material through the machine.\u003c\/li\u003e\n\u003cli\u003eKeep hands and tools away from the feed openings and rollers.\u003c\/li\u003e\n\u003cli\u003eSecure loose clothing, jewelry, and long hair.\u003c\/li\u003e\n\u003cli\u003eStop the machine if unusual noise, vibration, or resistance develops.\u003c\/li\u003e\n\u003cli\u003eDisconnect electrical power before cleaning or maintenance.\u003c\/li\u003e\n\u003cli\u003eDo not operate the machine on a GFCI circuit.\u003c\/li\u003e\n\u003cli\u003eUse only a 14 AWG or heavier extension cord.\u003c\/li\u003e\n\u003cli\u003eKeep extension cords under 25 feet.\u003c\/li\u003e\n\u003cli\u003eClean the machine after each processing session.\u003c\/li\u003e\n\u003cli\u003eAllow washed components to dry fully before restarting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePreparing Branches\u003c\/h3\u003e\n\u003cp\u003eProper preparation improves throughput and finished quality. Before processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove oversized branches.\u003c\/li\u003e\n\u003cli\u003eCut long branches into manageable sections.\u003c\/li\u003e\n\u003cli\u003eInspect for foreign objects.\u003c\/li\u003e\n\u003cli\u003eGroup branches by approximate diameter.\u003c\/li\u003e\n\u003cli\u003eRemove heavily tangled sections.\u003c\/li\u003e\n\u003cli\u003eSelect the correct feed opening.\u003c\/li\u003e\n\u003cli\u003eTest a small quantity before full production.\u003c\/li\u003e\n\u003cli\u003eConfirm the branch is not larger than 3\/8 inch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSelecting the Feed Opening\u003c\/h3\u003e\n\u003cp\u003eUse the opening that most closely matches the branch diameter.\u003c\/p\u003e\n\u003cp\u003eAn opening that is too small may:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequire excessive force\u003c\/li\u003e\n\u003cli\u003eDamage finished material\u003c\/li\u003e\n\u003cli\u003eSlow processing\u003c\/li\u003e\n\u003cli\u003eIncrease machine strain\u003c\/li\u003e\n\u003cli\u003eCause the branch to bind\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn opening that is too large may:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduce separation efficiency\u003c\/li\u003e\n\u003cli\u003eLeave material attached\u003c\/li\u003e\n\u003cli\u003eProduce inconsistent results\u003c\/li\u003e\n\u003cli\u003eAllow unpredictable branch movement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeeding Technique\u003c\/h3\u003e\n\u003cp\u003eHold the branch securely and align it with the selected opening. Guide the stem toward the rollers and allow the machine to pull it through. Avoid:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWrapping the branch around your hand\u003c\/li\u003e\n\u003cli\u003eJerking the branch\u003c\/li\u003e\n\u003cli\u003eTwisting aggressively\u003c\/li\u003e\n\u003cli\u003eFeeding tangled branches\u003c\/li\u003e\n\u003cli\u003eForcing oversized stems\u003c\/li\u003e\n\u003cli\u003ePlacing fingers near the feed opening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetting the Pull Speed\u003c\/h3\u003e\n\u003cp\u003eBegin with the Variable Speed Control at a lower setting. Gradually increase the speed after confirming that the material is separating cleanly. The ideal speed depends on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWet or dry condition\u003c\/li\u003e\n\u003cli\u003eBranch diameter\u003c\/li\u003e\n\u003cli\u003eMaterial density\u003c\/li\u003e\n\u003cli\u003eFlower structure\u003c\/li\u003e\n\u003cli\u003eDesired finished quality\u003c\/li\u003e\n\u003cli\u003eOperator experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWet Material Processing\u003c\/h3\u003e\n\u003cp\u003eWet branches are generally more flexible and tolerate faster roller speeds. For wet processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the correct feed opening.\u003c\/li\u003e\n\u003cli\u003eBegin at a moderate speed.\u003c\/li\u003e\n\u003cli\u003eIncrease speed gradually.\u003c\/li\u003e\n\u003cli\u003eAvoid compressing flower clusters.\u003c\/li\u003e\n\u003cli\u003eInspect the rollers for buildup.\u003c\/li\u003e\n\u003cli\u003eKeep the downstream collection area clear.\u003c\/li\u003e\n\u003cli\u003eClean periodically during long shifts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDry Material Processing\u003c\/h3\u003e\n\u003cp\u003eProperly dried branches require gentler handling. For dry processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBegin at the lowest practical speed.\u003c\/li\u003e\n\u003cli\u003eUse the opening closest to the stem diameter.\u003c\/li\u003e\n\u003cli\u003eAvoid brittle or excessively dry stems.\u003c\/li\u003e\n\u003cli\u003eTest a small batch first.\u003c\/li\u003e\n\u003cli\u003eStop if excessive breakage occurs.\u003c\/li\u003e\n\u003cli\u003eClean dry buildup regularly.\u003c\/li\u003e\n\u003cli\u003eInspect finished material frequently.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCleaning \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning After Each Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the machine from electrical power.\u003c\/li\u003e\n\u003cli\u003eAllow the rollers and motor to stop completely.\u003c\/li\u003e\n\u003cli\u003eRemove loose plant material.\u003c\/li\u003e\n\u003cli\u003eClean both feed openings.\u003c\/li\u003e\n\u003cli\u003eBrush debris from the rollers.\u003c\/li\u003e\n\u003cli\u003eWipe accessible stainless steel and aluminum surfaces.\u003c\/li\u003e\n\u003cli\u003eClean the work surface or optional stand.\u003c\/li\u003e\n\u003cli\u003eAllow all components to dry completely.\u003c\/li\u003e\n\u003cli\u003eDo not reconnect power until the machine is dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRoller Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect electrical power.\u003c\/li\u003e\n\u003cli\u003eRemove loose material with a soft brush.\u003c\/li\u003e\n\u003cli\u003eWipe neoprene rollers using an approved cleaner.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp metal tools.\u003c\/li\u003e\n\u003cli\u003eInspect the rollers for cracks, flat spots, or excessive wear.\u003c\/li\u003e\n\u003cli\u003eReplace damaged rollers with approved components.\u003c\/li\u003e\n\u003cli\u003eConfirm the rollers rotate evenly before restarting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeed Opening Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClear debris from both feed openings.\u003c\/li\u003e\n\u003cli\u003eInspect the openings for obstruction or damage.\u003c\/li\u003e\n\u003cli\u003eNever insert hands into the machine while connected to power.\u003c\/li\u003e\n\u003cli\u003eUse approved tools only after disconnecting the machine.\u003c\/li\u003e\n\u003cli\u003eConfirm both openings are clear before operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVariable Speed Control Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the control box clean and dry.\u003c\/li\u003e\n\u003cli\u003eDo not spray water directly onto the controls.\u003c\/li\u003e\n\u003cli\u003eInspect the speed dial and electrical connections.\u003c\/li\u003e\n\u003cli\u003eStop operating if speed becomes inconsistent.\u003c\/li\u003e\n\u003cli\u003eHave electrical repairs performed by qualified personnel.\u003c\/li\u003e\n\u003cli\u003eDo not open or modify the control enclosure without authorization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMotor and Drive Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the motor and drive system regularly.\u003c\/li\u003e\n\u003cli\u003eListen for unusual noise.\u003c\/li\u003e\n\u003cli\u003eCheck for slipping, vibration, or uneven roller movement.\u003c\/li\u003e\n\u003cli\u003eRemove buildup near moving components.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains tight.\u003c\/li\u003e\n\u003cli\u003eReplace worn components using approved CenturionPro parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExterior Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect electrical power.\u003c\/li\u003e\n\u003cli\u003eWipe the exterior with a lightly dampened cloth.\u003c\/li\u003e\n\u003cli\u003eDo not spray water into the motor, controls, wiring, or bearings.\u003c\/li\u003e\n\u003cli\u003eDo not submerge the machine.\u003c\/li\u003e\n\u003cli\u003eDry every surface before storage or reuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStand Maintenance\u003c\/strong\u003e (when using the optional HPTT Bucker Stand)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect all mounting points.\u003c\/li\u003e\n\u003cli\u003eTighten loose hardware.\u003c\/li\u003e\n\u003cli\u003eClean debris from the frame.\u003c\/li\u003e\n\u003cli\u003eConfirm the machine remains securely attached.\u003c\/li\u003e\n\u003cli\u003eInspect the stand for bending or instability.\u003c\/li\u003e\n\u003cli\u003eReplace damaged hardware before operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean and dry the HP TableTop before storage.\u003c\/li\u003e\n\u003cli\u003eDisconnect and secure the power cord.\u003c\/li\u003e\n\u003cli\u003eStore indoors in a dry location.\u003c\/li\u003e\n\u003cli\u003eProtect the rollers from deformation.\u003c\/li\u003e\n\u003cli\u003eKeep both feed openings free from debris.\u003c\/li\u003e\n\u003cli\u003eDo not place heavy objects on the machine.\u003c\/li\u003e\n\u003cli\u003eProtect the Variable Speed Control from impact and moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProfessional Warranty Coverage\u003c\/h3\u003e\n\u003cp\u003eThe CenturionPro HP TableTop Bucker includes a 2-year manufacturer warranty covering qualifying parts proven defective in materials or workmanship. The warranty period begins on the original purchase date.\u003c\/p\u003e\n\u003cp\u003ePotential exclusions may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNormal wear\u003c\/li\u003e\n\u003cli\u003eImproper use\u003c\/li\u003e\n\u003cli\u003eInsufficient maintenance\u003c\/li\u003e\n\u003cli\u003eElectrical damage\u003c\/li\u003e\n\u003cli\u003eAccidental damage\u003c\/li\u003e\n\u003cli\u003eUnauthorized modifications\u003c\/li\u003e\n\u003cli\u003eConsumable components\u003c\/li\u003e\n\u003cli\u003eDamage caused by improper cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeep proof of purchase and follow all manufacturer registration, maintenance, and warranty-claim procedures.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the HP TableTop Bucker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWet Processing Capacity: Up to 75 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eDry Processing Capacity: Up to 15 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eSpeed Control: Adjustable 10–30 in\/sec Pull Rate\u003c\/li\u003e\n\u003cli\u003eWarranty: 2-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCenturionPro HP TableTop Bucker\u003c\/li\u003e\n\u003cli\u003eIntegrated Variable Speed Control\u003c\/li\u003e\n\u003cli\u003eNeoprene Rubber Roller Set\u003c\/li\u003e\n\u003cli\u003e1\/4-Inch Feed Opening\u003c\/li\u003e\n\u003cli\u003e3\/8-Inch Feed Opening\u003c\/li\u003e\n\u003cli\u003eIntegrated Carrying Handle\u003c\/li\u003e\n\u003cli\u003ePower Cord\u003c\/li\u003e\n\u003cli\u003eOwner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCenturionPro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eHP TableTop Bucker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003eCP-16000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eVariable-Speed Roller Bucking Machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Method\u003c\/td\u003e\n\u003ctd\u003eDual-Roller Pull-Through De-Stemming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Material\u003c\/td\u003e\n\u003ctd\u003eWet and Properly Dried Plant Material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWet Processing Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 75 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Processing Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 15 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHuman Workers Replaced\u003c\/td\u003e\n\u003ctd\u003eApproximately 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed Entry Sizes\u003c\/td\u003e\n\u003ctd\u003e1\/4\" and 3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Stem Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller Sets\u003c\/td\u003e\n\u003ctd\u003eNeoprene Rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePull Speed\u003c\/td\u003e\n\u003ctd\u003eApproximately 10–30 in\/sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePull Strength\u003c\/td\u003e\n\u003ctd\u003eMore Than 300 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Motor\u003c\/td\u003e\n\u003ctd\u003e0.33 HP, IP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003eApproximately 1,690 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable Speed Control\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReverse Operation\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuty Cycle\u003c\/td\u003e\n\u003ctd\u003eContinuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Input\u003c\/td\u003e\n\u003ctd\u003e120V, 60 Hz, Single Phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Operating Current\u003c\/td\u003e\n\u003ctd\u003eLess Than 3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Circuit Requirement\u003c\/td\u003e\n\u003ctd\u003e15A at 120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Input\u003c\/td\u003e\n\u003ctd\u003e240V, 50 Hz, Single Phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Operating Current\u003c\/td\u003e\n\u003ctd\u003eLess Than 1.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Circuit Requirement\u003c\/td\u003e\n\u003ctd\u003e15A at 220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGFCI Compatible\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Extension Cord\u003c\/td\u003e\n\u003ctd\u003e14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Extension Cord Length\u003c\/td\u003e\n\u003ctd\u003e25 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Materials\u003c\/td\u003e\n\u003ctd\u003e304 Stainless Steel and Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e18\" L × 15\" W × 17\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 50 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTabletop Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrying Handle\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Stand\u003c\/td\u003e\n\u003ctd\u003eAvailable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMP Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUL Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCE Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"CenturionPro","offers":[{"title":"Not Included \/ Not Included","offer_id":49983979618554,"sku":null,"price":1495.0,"currency_code":"USD","in_stock":true},{"title":"Add Stand (+$1182.00) \/ Not Included","offer_id":49983979651322,"sku":null,"price":2677.0,"currency_code":"USD","in_stock":true},{"title":"Not Included \/ Add Parts Kit (+$1393.00)","offer_id":49983979684090,"sku":null,"price":2888.0,"currency_code":"USD","in_stock":true},{"title":"Add Stand (+$1182.00) \/ Add Parts Kit (+$1393.00)","offer_id":49983979716858,"sku":null,"price":4070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/1_1800x1800_CPro-Buckers-HPTT.webp?v=1785889475","url":"https:\/\/cultivasupply.com\/products\/centurionpro-hp-tabletop-bucker","provider":"Cultiva Supply","version":"1.0","type":"link"}