{"product_id":"centurionpro-dbt-model-4-dry-batch-trimmer","title":"CenturionPro DBT Model 4 Dry Batch Trimmer","description":"\u003cp\u003eThe CenturionPro DBT Model 4 Dry Batch Trimmer is an industrial-scale dry-processing system engineered for large harvests, commercial facilities, and operators who need exceptional throughput without sacrificing gentle handling or consistency.\u003c\/p\u003e\n\n\u003cp\u003eCapable of processing up to 108 pounds of properly dried plant material per hour, the DBT Model 4 can replace the output of a large manual trimming crew while delivering repeatable results across every batch. Its combination of Soft Tumble Technology, integrated Variable Speed Control, and automatic timer control gives operators precise command over speed and cycle duration.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eProcesses Up to 108 lbs Dry Per Hour\u003c\/li\u003e\n\u003cli\u003eVariable Speed Control with Integrated Timer\u003c\/li\u003e\n\u003cli\u003eAdjustable Industrial Stand for Mobile Positioning\u003c\/li\u003e\n\u003cli\u003e3-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eUnlike trimming systems that rely on aggressive suction or high-impact cutting, the DBT Model 4 gently rotates dried material inside a large electropolished stainless steel tumbler. This controlled movement encourages unwanted leaf matter to pass through the plastic blade sheet while helping preserve the natural structure and appearance of the finished material.\u003c\/p\u003e\n\n\u003cp\u003eThe integrated Variable Speed Control allows the tumbler rate to be adjusted according to material size, density, moisture level, and desired finish. Lower speeds provide gentler handling for delicate batches, while higher settings increase movement and throughput for denser material.\u003c\/p\u003e\n\n\u003cp\u003eAn automatic timer allows operators to establish repeatable cycle lengths and stop the machine at the end of each programmed run. Once the ideal settings have been identified, teams can reproduce the same process across future batches while reducing the risk of over-processing.\u003c\/p\u003e\n\n\u003cp\u003eThe DBT Model 4 includes an adjustable industrial stand with locking casters. This mobile platform improves loading, unloading, cleaning, and facility positioning while allowing the machine to be moved between processing areas as production requirements change.\u003c\/p\u003e\n\n\u003cp\u003eIts oversized tumbler measures approximately 66 inches long and 20 inches in diameter, providing the capacity required for high-volume dry processing. The machine measures 67 inches long, 36 inches wide, and 53 inches high, creating a substantial but efficient footprint for commercial facilities.\u003c\/p\u003e\n\n\u003cp\u003eThe anodized aluminum frame and electropolished stainless steel tumbler are engineered for repeated industrial use. A 1\/4 HP motor provides dependable movement while drawing only approximately 3 amps from a standard North American 110V supply.\u003c\/p\u003e\n\n\u003cp\u003eA removable trim collection system captures separated plant material beneath the tumbler, helping keep the surrounding workspace organized and simplifying recovery after each batch.\u003c\/p\u003e\n\n\u003cp\u003eThe DBT Model 4 is also compatible with an optional Sorter Conversion Kit. This accessory transforms the trimmer into a high-capacity size sorter in less than five minutes and can sort up to approximately 125 pounds of material per hour.\u003c\/p\u003e\n\n\u003cp\u003eBacked by a 3-year manufacturer warranty, the CenturionPro DBT Model 4 is built for commercial operators who need industrial dry-processing capacity, adjustable control, automated timing, mobile positioning, and dependable batch-to-batch consistency.\u003c\/p\u003e\n\n\u003ch3\u003eSoft Tumble Technology\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 uses CenturionPro’s Soft Tumble Technology to gently rotate properly dried plant material across the trimming surface. Rather than relying on aggressive suction, the material tumbles naturally so unwanted leaf matter can separate gradually through the plastic blade sheet.\u003c\/p\u003e\n\u003cp\u003eBenefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGentle dry processing\u003c\/li\u003e\n\u003cli\u003eConsistent batch-to-batch performance\u003c\/li\u003e\n\u003cli\u003eReduced surface damage\u003c\/li\u003e\n\u003cli\u003eNo separate blower system\u003c\/li\u003e\n\u003cli\u003eNo lubricating sprays required\u003c\/li\u003e\n\u003cli\u003eImproved control over delicate material\u003c\/li\u003e\n\u003cli\u003eProfessional finish quality at industrial scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eUp to 108 lbs Per Hour\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 processes up to approximately 108 pounds of properly dried plant material per hour. Actual throughput will depend on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial moisture\u003c\/li\u003e\n\u003cli\u003eBatch size\u003c\/li\u003e\n\u003cli\u003ePlant density\u003c\/li\u003e\n\u003cli\u003ePreparation quality\u003c\/li\u003e\n\u003cli\u003eTumbler speed\u003c\/li\u003e\n\u003cli\u003eTimer setting\u003c\/li\u003e\n\u003cli\u003eDesired finish\u003c\/li\u003e\n\u003cli\u003eBlade-sheet cleanliness\u003c\/li\u003e\n\u003cli\u003eOperator experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIntegrated Variable Speed Control\u003c\/h3\u003e\n\u003cp\u003eVariable Speed Control is included as standard equipment. Operators can adjust tumbler speed according to the characteristics of each batch.\u003c\/p\u003e\n\u003cp\u003eLower speeds support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGentler processing\u003c\/li\u003e\n\u003cli\u003eDelicate material\u003c\/li\u003e\n\u003cli\u003eSmaller flower structures\u003c\/li\u003e\n\u003cli\u003eReduced risk of over-processing\u003c\/li\u003e\n\u003cli\u003eGreater control over finished appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHigher speeds support:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDenser batches\u003c\/li\u003e\n\u003cli\u003eIncreased material movement\u003c\/li\u003e\n\u003cli\u003eFaster processing\u003c\/li\u003e\n\u003cli\u003eGreater hourly throughput\u003c\/li\u003e\n\u003cli\u003eMore aggressive leaf separation when required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAutomatic Timer Control\u003c\/h3\u003e\n\u003cp\u003eThe integrated timer allows operators to program repeatable trimming cycles. Once the ideal speed and processing duration have been established, the timer can help:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrevent over-processing\u003c\/li\u003e\n\u003cli\u003eImprove batch consistency\u003c\/li\u003e\n\u003cli\u003eReduce constant monitoring\u003c\/li\u003e\n\u003cli\u003eStandardize operating procedures\u003c\/li\u003e\n\u003cli\u003eFree staff for other production tasks\u003c\/li\u003e\n\u003cli\u003eDeliver repeatable results across multiple shifts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesigned for Large Commercial Harvests\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 is designed for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge commercial facilities\u003c\/li\u003e\n\u003cli\u003eHigh-volume dry-processing rooms\u003c\/li\u003e\n\u003cli\u003eCentralized harvest operations\u003c\/li\u003e\n\u003cli\u003eFacilities replacing large manual crews\u003c\/li\u003e\n\u003cli\u003eProduction teams requiring repeatable cycles\u003c\/li\u003e\n\u003cli\u003eOperators scaling beyond smaller batch trimmers\u003c\/li\u003e\n\u003cli\u003eBusinesses needing mobile industrial equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e66-Inch Stainless Steel Tumbler\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 includes one oversized electropolished stainless steel tumbler measuring approximately 66 inches long and 20 inches in diameter. Its substantial processing chamber supports large batch volumes while maintaining the gentle movement required for controlled dry trimming.\u003c\/p\u003e\n\n\u003ch3\u003ePlastic Blade Sheet\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 uses a plastic blade sheet designed for delicate dry processing. The sheet allows unwanted leaf material to pass through while limiting the aggressive contact associated with rigid cutting systems.\u003c\/p\u003e\n\u003cp\u003eBenefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGentle separation\u003c\/li\u003e\n\u003cli\u003eConsistent trimming action\u003c\/li\u003e\n\u003cli\u003eReduced abrasion\u003c\/li\u003e\n\u003cli\u003eReplaceable construction\u003c\/li\u003e\n\u003cli\u003eStraightforward cleaning\u003c\/li\u003e\n\u003cli\u003eEasy visual inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eElectropolished Stainless Steel Tumbler\u003c\/h3\u003e\n\u003cp\u003eThe standard tumbler is manufactured from electropolished stainless steel. This provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrosion resistance\u003c\/li\u003e\n\u003cli\u003eSmooth material movement\u003c\/li\u003e\n\u003cli\u003eEasy sanitation\u003c\/li\u003e\n\u003cli\u003eLong service life\u003c\/li\u003e\n\u003cli\u003eNo applied non-stick coating\u003c\/li\u003e\n\u003cli\u003eDependable industrial performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAnodized Aluminum Construction\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 uses a durable anodized aluminum frame and housing. This provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCommercial-grade strength\u003c\/li\u003e\n\u003cli\u003eCorrosion resistance\u003c\/li\u003e\n\u003cli\u003eStable operation\u003c\/li\u003e\n\u003cli\u003eStraightforward exterior cleaning\u003c\/li\u003e\n\u003cli\u003eLong-term reliability\u003c\/li\u003e\n\u003cli\u003eReduced weight compared with heavier steel frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdjustable Mobile Stand\u003c\/h3\u003e\n\u003cp\u003eThe included industrial stand allows operators to adjust the machine’s angle and reposition it throughout a facility. The stand provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved loading ergonomics\u003c\/li\u003e\n\u003cli\u003eEasier unloading\u003c\/li\u003e\n\u003cli\u003eBetter cleaning access\u003c\/li\u003e\n\u003cli\u003eMobile facility placement\u003c\/li\u003e\n\u003cli\u003eLocking caster stability\u003c\/li\u003e\n\u003cli\u003eFlexible workflow integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStandard 110V Operation\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 operates from a standard North American 110V supply and draws approximately 3 amps. This provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStraightforward facility setup\u003c\/li\u003e\n\u003cli\u003eNo high-amperage industrial circuit requirement\u003c\/li\u003e\n\u003cli\u003eLow electrical consumption for its capacity\u003c\/li\u003e\n\u003cli\u003eGreater flexibility in machine placement\u003c\/li\u003e\n\u003cli\u003eEasier integration into existing processing rooms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInternational operation is rated at approximately 220V and 1.5 amps.\u003c\/p\u003e\n\n\u003ch3\u003eQuiet Blower-Free Operation\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 does not require a separate blower or leaf collection system. This reduces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating noise\u003c\/li\u003e\n\u003cli\u003eElectrical demand\u003c\/li\u003e\n\u003cli\u003eHose management\u003c\/li\u003e\n\u003cli\u003eEquipment footprint\u003c\/li\u003e\n\u003cli\u003eSetup complexity\u003c\/li\u003e\n\u003cli\u003eRoutine blower maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIntegrated Trim Collection\u003c\/h3\u003e\n\u003cp\u003eRemovable trim trays collect separated plant material beneath the tumbler during operation. The collection system helps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaintain a cleaner workspace\u003c\/li\u003e\n\u003cli\u003eOrganize separated material\u003c\/li\u003e\n\u003cli\u003eSimplify recovery\u003c\/li\u003e\n\u003cli\u003eReduce product loss\u003c\/li\u003e\n\u003cli\u003eSpeed up cleanup\u003c\/li\u003e\n\u003cli\u003eSupport further material processing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional Sorter Conversion Kit\u003c\/h3\u003e\n\u003cp\u003eThe optional DBT4 Sorter Conversion Kit transforms the machine into a commercial size sorter in less than five minutes. Once installed, the system can sort up to approximately 125 pounds of material per hour. This upgrade allows one machine to support two separate post-harvest functions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDry batch trimming\u003c\/li\u003e\n\u003cli\u003eFinished-material size sorting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe conversion kit can help reduce equipment duplication while improving facility efficiency. Selectable above.\u003c\/p\u003e\n\n\u003ch3\u003eOptional Parts Kit\u003c\/h3\u003e\n\u003cp\u003eThe DBT4 Parts Kit allows facilities to keep critical replacement components available during high-volume processing periods. The kit may include components such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoller assemblies\u003c\/li\u003e\n\u003cli\u003ePlastic blade sheet\u003c\/li\u003e\n\u003cli\u003eBlade-sheet holders\u003c\/li\u003e\n\u003cli\u003eBrush assembly\u003c\/li\u003e\n\u003cli\u003eCollection bins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeeping replacement components on hand can reduce downtime during cleaning, maintenance, or unexpected wear. Selectable above.\u003c\/p\u003e\n\n\u003ch3\u003eConsistent Batch Control\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 processes material in controlled batches. Operators can adjust each run according to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial dryness\u003c\/li\u003e\n\u003cli\u003eBatch weight\u003c\/li\u003e\n\u003cli\u003eFlower density\u003c\/li\u003e\n\u003cli\u003eTumbler speed\u003c\/li\u003e\n\u003cli\u003eTimer duration\u003c\/li\u003e\n\u003cli\u003eDesired finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTesting a smaller batch before full production helps establish the ideal speed and cycle length.\u003c\/p\u003e\n\n\u003ch3\u003eDesigned for Properly Dried Material\u003c\/h3\u003e\n\u003cp\u003eThe DBT Model 4 is intended exclusively for dry processing. Material that is too moist may not separate effectively, while excessively dry material may become brittle and lose more surface material during tumbling. The best results come from material that is dry enough for unwanted leaves to detach while retaining enough flexibility to withstand controlled movement.\u003c\/p\u003e\n\n\u003ch3\u003eReduced Manual Labor\u003c\/h3\u003e\n\u003cp\u003eWith processing capacity reaching approximately 108 pounds per hour, the DBT Model 4 can replace a substantial manual trimming workload. One operator can manage the automated batch process while other team members focus on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial preparation\u003c\/li\u003e\n\u003cli\u003eQuality inspection\u003c\/li\u003e\n\u003cli\u003ePackaging\u003c\/li\u003e\n\u003cli\u003eStorage\u003c\/li\u003e\n\u003cli\u003eEquipment cleaning\u003c\/li\u003e\n\u003cli\u003eInventory management\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRecommended Operating Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRead the complete owner’s manual before operating.\u003c\/li\u003e\n\u003cli\u003ePosition the machine on a stable, level floor.\u003c\/li\u003e\n\u003cli\u003eLock all stand casters before operation.\u003c\/li\u003e\n\u003cli\u003eConfirm the tumbler, plastic blade sheet, and trim trays are installed correctly.\u003c\/li\u003e\n\u003cli\u003eInspect the electrical cord, controls, and timer before each use.\u003c\/li\u003e\n\u003cli\u003eProcess only properly dried plant material.\u003c\/li\u003e\n\u003cli\u003eRemove large stems and branches before loading.\u003c\/li\u003e\n\u003cli\u003eBegin with a smaller test batch.\u003c\/li\u003e\n\u003cli\u003eStart at a lower speed setting.\u003c\/li\u003e\n\u003cli\u003eIncrease tumbler speed gradually when necessary.\u003c\/li\u003e\n\u003cli\u003eUse a conservative timer setting during initial testing.\u003c\/li\u003e\n\u003cli\u003eDo not overfill the tumbler.\u003c\/li\u003e\n\u003cli\u003eLeave adequate open space for material to tumble freely.\u003c\/li\u003e\n\u003cli\u003eInspect the batch after each test cycle.\u003c\/li\u003e\n\u003cli\u003eKeep hands, tools, jewelry, and loose clothing away from moving components.\u003c\/li\u003e\n\u003cli\u003eNever operate the machine with safety guards removed.\u003c\/li\u003e\n\u003cli\u003eDisconnect electrical power before cleaning or maintenance.\u003c\/li\u003e\n\u003cli\u003eKeep the control box and motor away from water.\u003c\/li\u003e\n\u003cli\u003eAllow the tumbler to stop completely before unloading.\u003c\/li\u003e\n\u003cli\u003eClean the tumbler, blade sheet, trays, and stand after every operating session.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePreparing Material for Dry Trimming\u003c\/h3\u003e\n\u003cp\u003eBefore processing:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove large stems and branches.\u003c\/li\u003e\n\u003cli\u003eConfirm unwanted leaves are dry enough to separate.\u003c\/li\u003e\n\u003cli\u003eAvoid loading freshly cut or damp material.\u003c\/li\u003e\n\u003cli\u003eAvoid material that crumbles under light handling.\u003c\/li\u003e\n\u003cli\u003eGroup similarly sized material into each batch.\u003c\/li\u003e\n\u003cli\u003eMaintain consistent moisture levels within the batch.\u003c\/li\u003e\n\u003cli\u003eTest a smaller sample first.\u003c\/li\u003e\n\u003cli\u003eAdjust speed and timer settings based on the result.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConsistent preparation improves throughput, finish quality, and repeatability.\u003c\/p\u003e\n\n\u003ch3\u003eBatch Loading\u003c\/h3\u003e\n\u003cp\u003eDo not completely fill the tumbler. Material requires sufficient open space to rotate and move across the plastic blade sheet. Overloading may:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRestrict material movement\u003c\/li\u003e\n\u003cli\u003eProduce inconsistent results\u003c\/li\u003e\n\u003cli\u003eIncrease processing time\u003c\/li\u003e\n\u003cli\u003eReduce separation efficiency\u003c\/li\u003e\n\u003cli\u003ePlace unnecessary stress on drive components\u003c\/li\u003e\n\u003cli\u003eMake unloading more difficult\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSetting the Tumbler Speed\u003c\/h3\u003e\n\u003cp\u003eBegin at a lower Variable Speed Control setting. Observe material movement and gradually increase speed as required. The correct setting will vary according to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial density\u003c\/li\u003e\n\u003cli\u003eFlower size\u003c\/li\u003e\n\u003cli\u003eMoisture content\u003c\/li\u003e\n\u003cli\u003eBatch weight\u003c\/li\u003e\n\u003cli\u003eDesired finish\u003c\/li\u003e\n\u003cli\u003eTimer duration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSetting the Timer\u003c\/h3\u003e\n\u003cp\u003eStart with a short timer cycle during initial testing. Inspect the material at the end of the cycle and add additional time only when necessary. Once the ideal time has been identified:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecord the plant variety\u003c\/li\u003e\n\u003cli\u003eRecord the moisture condition\u003c\/li\u003e\n\u003cli\u003eRecord the batch weight\u003c\/li\u003e\n\u003cli\u003eRecord the speed setting\u003c\/li\u003e\n\u003cli\u003eRecord the timer duration\u003c\/li\u003e\n\u003cli\u003eUse the documented settings as a starting point for future batches\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdjusting the Stand\u003c\/h3\u003e\n\u003cp\u003eBefore adjusting the stand:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStop the machine completely.\u003c\/li\u003e\n\u003cli\u003eDisconnect electrical power.\u003c\/li\u003e\n\u003cli\u003eConfirm the unit is stable.\u003c\/li\u003e\n\u003cli\u003eAdjust the stand to the desired position.\u003c\/li\u003e\n\u003cli\u003eSecure all adjustment points.\u003c\/li\u003e\n\u003cli\u003eLock all casters before restarting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNever adjust the stand while the tumbler is moving.\u003c\/p\u003e\n\n\u003ch3\u003eMonitoring the Trim\u003c\/h3\u003e\n\u003cp\u003eInspect the material regularly during the first several batches. Different plant varieties and moisture levels may require different combinations of speed and time. Documenting successful settings helps operators maintain consistency across future harvests and production shifts.\u003c\/p\u003e\n\n\u003ch3\u003eCleaning \u0026amp; Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning After Each Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the machine from electrical power.\u003c\/li\u003e\n\u003cli\u003eAllow the tumbler to stop completely.\u003c\/li\u003e\n\u003cli\u003eRemove the tumbler according to the owner’s manual.\u003c\/li\u003e\n\u003cli\u003eRemove the plastic blade sheet when required.\u003c\/li\u003e\n\u003cli\u003eEmpty all trim trays.\u003c\/li\u003e\n\u003cli\u003eBrush away loose plant material.\u003c\/li\u003e\n\u003cli\u003eClean the tumbler and blade sheet.\u003c\/li\u003e\n\u003cli\u003eWipe down the anodized aluminum frame.\u003c\/li\u003e\n\u003cli\u003eClean the adjustable stand and casters.\u003c\/li\u003e\n\u003cli\u003eAllow all components to dry completely.\u003c\/li\u003e\n\u003cli\u003eDo not reconnect power until the machine is fully dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTumbler Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove loose debris with a soft brush.\u003c\/li\u003e\n\u003cli\u003eWash with warm water and mild soap when required.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eAllow the tumbler to dry completely.\u003c\/li\u003e\n\u003cli\u003eAvoid metal scrapers and aggressive abrasive tools.\u003c\/li\u003e\n\u003cli\u003eDo not reinstall the tumbler while wet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic Blade Sheet Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove accumulated plant material after each operating session.\u003c\/li\u003e\n\u003cli\u003eInspect the sheet for cracks, deformation, or excessive wear.\u003c\/li\u003e\n\u003cli\u003eWash gently using mild soap and water.\u003c\/li\u003e\n\u003cli\u003eAvoid sharp tools that may damage the sheet.\u003c\/li\u003e\n\u003cli\u003eReplace damaged components with approved CenturionPro parts.\u003c\/li\u003e\n\u003cli\u003eAllow the sheet to dry fully before reinstalling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTrim Tray Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmpty every tray after each batch.\u003c\/li\u003e\n\u003cli\u003eBrush away loose plant material.\u003c\/li\u003e\n\u003cli\u003eWash with mild soap and water when necessary.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eAllow trays to dry completely before reinstalling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTimer and Control Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the timer and Variable Speed Control box clean and dry.\u003c\/li\u003e\n\u003cli\u003eDo not spray water directly onto the controls.\u003c\/li\u003e\n\u003cli\u003eInspect switches, dials, and electrical connections regularly.\u003c\/li\u003e\n\u003cli\u003eStop using the machine if speed or timer operation becomes inconsistent.\u003c\/li\u003e\n\u003cli\u003eHave electrical repairs completed by qualified personnel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStand and Caster Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove plant material from the stand after every use.\u003c\/li\u003e\n\u003cli\u003eWipe down the frame.\u003c\/li\u003e\n\u003cli\u003eInspect adjustment points for looseness.\u003c\/li\u003e\n\u003cli\u003eConfirm the caster locks operate correctly.\u003c\/li\u003e\n\u003cli\u003eTighten loose hardware when required.\u003c\/li\u003e\n\u003cli\u003eReplace damaged wheels, locks, or fasteners before operating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRoller and Drive Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the rollers and drive system regularly.\u003c\/li\u003e\n\u003cli\u003eRemove buildup that may interfere with tumbler movement.\u003c\/li\u003e\n\u003cli\u003eCheck for slipping, vibration, unusual noise, or uneven rotation.\u003c\/li\u003e\n\u003cli\u003eReplace worn parts using approved CenturionPro components.\u003c\/li\u003e\n\u003cli\u003eDo not operate the machine if the tumbler fails to rotate smoothly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSorter Kit Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the conversion components after use when necessary.\u003c\/li\u003e\n\u003cli\u003eBrush away loose plant material.\u003c\/li\u003e\n\u003cli\u003eClean each sorting surface carefully.\u003c\/li\u003e\n\u003cli\u003eInspect chutes and screens for obstruction or damage.\u003c\/li\u003e\n\u003cli\u003eAllow all components to dry before storage.\u003c\/li\u003e\n\u003cli\u003eStore conversion parts where they cannot be bent or crushed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean and dry the machine before storage.\u003c\/li\u003e\n\u003cli\u003eStore indoors in a dry environment.\u003c\/li\u003e\n\u003cli\u003eLock all caster wheels.\u003c\/li\u003e\n\u003cli\u003eProtect the electrical cord, timer, and control box.\u003c\/li\u003e\n\u003cli\u003eDo not place heavy objects on the machine.\u003c\/li\u003e\n\u003cli\u003eStore removable tumblers, blade sheets, and trays safely.\u003c\/li\u003e\n\u003cli\u003eProtect Sorter Kit components from bending or impact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCenturionPro Dry Batch Trimmer Warranty\u003c\/h3\u003e\n\u003cp\u003eCenturionPro Dry Batch Trimmers are backed by a manufacturer warranty covering defects in materials and workmanship from the original date of purchase. Warranty coverage varies by model. DBT Model 0 includes a 2 year manufacturer warranty, while DBT Models 1, 2, 3, 4, and 5 include a 3 year manufacturer warranty.\u003c\/p\u003e\n\u003cp\u003eThe warranty covers the repair or replacement of parts found to be defective due to manufacturing defects under normal use. It does not cover normal wear and tear or consumable components, including belts, O-rings, brushes, bearings, blades, or other parts subject to regular use.\u003c\/p\u003e\n\u003cp\u003eTo receive full warranty coverage, your machine must be registered with CenturionPro after purchase in accordance with the manufacturer’s registration requirements.\u003c\/p\u003e\n\u003cp\u003eIf a warranty claim is approved, replacement parts will be supplied at no charge. Customers are responsible for shipping costs associated with returning defective parts or equipment for inspection or service.\u003c\/p\u003e\n\u003cp\u003eFor warranty assistance, please contact CenturionPro Technical Support with your machine model, serial number, proof of purchase, and a description of the issue. Warranty approval and service are provided at the discretion of CenturionPro Solutions in accordance with their published warranty terms.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Choose the DBT Model 4\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDry Processing Capacity: Up to 108 lbs\/hr\u003c\/li\u003e\n\u003cli\u003eAutomation: Variable Speed + Integrated Timer\u003c\/li\u003e\n\u003cli\u003eMobility: Adjustable Industrial Wheeled Stand\u003c\/li\u003e\n\u003cli\u003eWarranty: 3-Year Manufacturer Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCenturionPro DBT Model 4 Dry Batch Trimmer\u003c\/li\u003e\n\u003cli\u003eElectropolished Stainless Steel Trimming Tumbler\u003c\/li\u003e\n\u003cli\u003ePlastic Blade Sheet\u003c\/li\u003e\n\u003cli\u003eRemovable Trim Trays\u003c\/li\u003e\n\u003cli\u003eIntegrated Variable Speed Control\u003c\/li\u003e\n\u003cli\u003eIntegrated Timer Control\u003c\/li\u003e\n\u003cli\u003eAdjustable Industrial Stand\u003c\/li\u003e\n\u003cli\u003eLocking Casters\u003c\/li\u003e\n\u003cli\u003ePower Cord\u003c\/li\u003e\n\u003cli\u003eOwner’s Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCenturionPro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDBT Model 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eCP-15000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eIndustrial Dry Batch Plant Trimmer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Method\u003c\/td\u003e\n\u003ctd\u003eTimed Variable-Speed Soft Tumble Dry Trimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Material\u003c\/td\u003e\n\u003ctd\u003eProperly Dried Plant Material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry Processing Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 108 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed Type\u003c\/td\u003e\n\u003ctd\u003eBatch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlower System\u003c\/td\u003e\n\u003ctd\u003eNot Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubricating Sprays Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Tumblers\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Material\u003c\/td\u003e\n\u003ctd\u003eElectropolished Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Diameter\u003c\/td\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTumbler Length\u003c\/td\u003e\n\u003ctd\u003e66\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlade Sheet\u003c\/td\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Material\u003c\/td\u003e\n\u003ctd\u003eAnodized Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVariable Speed Control\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimer Control\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable Stand\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMobile Casters\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNorth American Input\u003c\/td\u003e\n\u003ctd\u003e110V, 3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational Input\u003c\/td\u003e\n\u003ctd\u003e220V, 1.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1\/4 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e67\" L × 36\" W × 53\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e240 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrim Trays\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSorter Conversion Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSorter Conversion Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 125 lbs\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParts Kit Available\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"CenturionPro","offers":[{"title":"Not Included \/ Not Included","offer_id":49983874236666,"sku":null,"price":10995.0,"currency_code":"USD","in_stock":true},{"title":"Add Sorter Conversion Kit (+$5400) \/ Not Included","offer_id":49983874269434,"sku":null,"price":16395.0,"currency_code":"USD","in_stock":true},{"title":"Not Included \/ Add Parts Kit (+$2500)","offer_id":49983874302202,"sku":null,"price":13495.0,"currency_code":"USD","in_stock":true},{"title":"Add Sorter Conversion Kit (+$5400) \/ Add Parts Kit (+$2500)","offer_id":49983874334970,"sku":null,"price":18895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/1800x1800_DBT-Model-4_1.webp?v=1785881710","url":"https:\/\/cultivasupply.com\/products\/centurionpro-dbt-model-4-dry-batch-trimmer","provider":"Cultiva Supply","version":"1.0","type":"link"}