{"title":"GROW1 Inline Fans","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eShop GROW1 inline fans for powerful, dependable grow room ventilation. Featuring durable ceramic coated metal housings and high output airflow, GROW1 fans are built for grow tents, grow rooms, greenhouses, carbon filtration, intake, and exhaust applications.\u003c\/p\u003e","products":[{"product_id":"grow1-4-inch-inline-fan","title":"GROW1 4\" Inline Fan","description":"\u003cp\u003eThe GROW1 4\" Inline Fan is a compact, durable ventilation fan designed for smaller grow tents, propagation spaces, and other confined areas where a full size inline fan isn’t necessary.\u003c\/p\u003e\n\u003cp\u003eProducing 171 CFM, it provides dependable air exchange for smaller enclosed spaces, while its thermally protected AC motor is built to handle extended run times without overheating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: Compact 171 CFM Performance\u003c\/li\u003e\n\u003cli\u003eMotor: 2,910 RPM Thermally Protected AC\u003c\/li\u003e\n\u003cli\u003eBuild: Ceramic Coated Metal Housing\u003c\/li\u003e\n\u003cli\u003eSetup: Brackets + 8 Foot Power Cord Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fan’s motor operates at 2,910 RPM and includes thermal protection, which helps guard against overheating during continuous operation. This makes the GROW1 4\" Inline Fan a practical option for growers running smaller ventilation systems for extended periods.\u003c\/p\u003e\n\u003cp\u003eLike the rest of the GROW1 lineup, this fan uses a ceramic coated metal housing rather than lightweight plastic. This construction is designed to resist corrosion, withstand humid grow room conditions, and hold up to repeated use over time.\u003c\/p\u003e\n\u003cp\u003eThe fan comes with mounting brackets and an 8 foot prewired power cord, allowing for a straightforward installation without needing to source additional hardware or wiring.\u003c\/p\u003e\n\u003cp\u003eWhether mounted for intake or exhaust, the GROW1 4\" Inline Fan is designed to integrate easily into new or existing 4 inch ducting systems, making it a practical choice for compact grow tents, seedling stations, and small propagation setups.\u003c\/p\u003e\n\u003ch3\u003e171 CFM Airflow\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 4\" Inline Fan delivers 171 CFM of airflow, suitable for small grow tents, propagation spaces, seedling stations, small closets, and other compact ventilation applications.\u003c\/p\u003e\n\u003ch3\u003eThermally Protected AC Motor\u003c\/h3\u003e\n\u003cp\u003eThe internal AC motor operates at 2,910 RPM and includes thermal protection. This helps guard the motor against overheating during long duty cycles, supporting more dependable performance in smaller ventilation systems that run for extended periods.\u003c\/p\u003e\n\u003ch3\u003e2,910 RPM Motor Speed\u003c\/h3\u003e\n\u003cp\u003eThe motor’s rated speed of 2,910 RPM is designed to provide effective airflow for a compact 4 inch fan while working alongside the housing and blade design to maintain efficient performance.\u003c\/p\u003e\n\u003ch3\u003eCeramic Coated Metal Housing\u003c\/h3\u003e\n\u003cp\u003eThe fan housing uses a ceramic coated metal construction rather than plastic. This is designed to provide greater resistance to corrosion, better durability in humid grow room environments, and longer service life under repeated use.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Grow Room Conditions\u003c\/h3\u003e\n\u003cp\u003eIndoor growing environments often involve elevated humidity and repeated temperature changes, especially in propagation and seedling areas. The ceramic coated housing is intended to hold up to these conditions better than uncoated or plastic alternatives, helping the fan maintain performance over time.\u003c\/p\u003e\n\u003ch3\u003eCompact 4 Inch Design\u003c\/h3\u003e\n\u003cp\u003eThe 4 inch duct size is well suited for smaller enclosed spaces where a larger fan would be unnecessary or difficult to install, including compact grow tents, propagation boxes, seedling stations, and small closets.\u003c\/p\u003e\n\u003ch3\u003eIntake or Exhaust Applications\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 4\" Inline Fan can be installed for either intake or exhaust airflow. Common configurations include exhausting warm air from a small tent, bringing in fresh air, supporting compact carbon filtration, and maintaining general air exchange.\u003c\/p\u003e\n\u003ch3\u003eSmall Grow Tent Ventilation\u003c\/h3\u003e\n\u003cp\u003eThe fan is well suited for ventilating small grow tents where consistent air exchange helps manage heat, humidity, and fresh air supply. Actual ventilation needs will depend on the size of the space, lighting heat load, ducting configuration, and filtration used.\u003c\/p\u003e\n\u003ch3\u003ePropagation and Seedling Use\u003c\/h3\u003e\n\u003cp\u003eThe compact airflow output makes this fan a good match for propagation tents, seedling stations, and clone rooms, where gentler and more contained air exchange is often preferred over the higher output of larger fans.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eMounting brackets are included to simplify installation into a 4 inch ducting system. The fan is designed to be positioned inline with minimal additional hardware required.\u003c\/p\u003e\n\u003ch3\u003e8 Foot Prewired Power Cord\u003c\/h3\u003e\n\u003cp\u003eAn 8 foot prewired power cord is included, giving installers flexibility in fan placement without needing to be positioned directly next to an outlet.\u003c\/p\u003e\n\u003ch3\u003eRecommended Installation Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the connected ducting is 4 inches in diameter.\u003c\/li\u003e\n\u003cli\u003eInstall the fan in the correct airflow direction.\u003c\/li\u003e\n\u003cli\u003eSecure the fan using the included mounting brackets.\u003c\/li\u003e\n\u003cli\u003eSupport connected ducting independently when necessary.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs reasonably short.\u003c\/li\u003e\n\u003cli\u003eMinimize unnecessary bends.\u003c\/li\u003e\n\u003cli\u003eKeep intake and exhaust openings unobstructed.\u003c\/li\u003e\n\u003cli\u003eKeep electrical connections dry.\u003c\/li\u003e\n\u003cli\u003eClean connected filters regularly.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation Planning\u003c\/h3\u003e\n\u003cp\u003eFan performance can be affected by duct length, duct diameter, carbon filters, sharp bends, intake restrictions, and exhaust restrictions. The rated 171 CFM represents the fan’s output rating. Actual airflow within an installed system may be lower depending on overall system resistance.\u003c\/p\u003e\n\u003ch3\u003eDucting Setup\u003c\/h3\u003e\n\u003cp\u003eFor stronger ventilation performance: use properly sized 4 inch ducting, keep ducting as straight as practical, avoid crushing flexible ducting, minimize sharp turns, secure connections with appropriate clamps, and seal unwanted air leaks.\u003c\/p\u003e\n\u003ch3\u003eCarbon Filter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into compatible 4 inch filtration systems. When pairing with a carbon filter, confirm the filter uses compatible 4 inch connections, check the filter’s airflow rating against the fan’s output, account for the added airflow resistance, and support the filter independently when appropriate.\u003c\/p\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the fan from power.\u003c\/li\u003e\n\u003cli\u003eInspect the intake and exhaust openings.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect connected ducting.\u003c\/li\u003e\n\u003cli\u003eClean filters according to their manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHousing Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the ceramic coated housing with a soft, dry or lightly damp cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive scrubbing tools that could damage the coating.\u003c\/li\u003e\n\u003cli\u003eKeep the housing free from built up dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuct Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect flexible ducting periodically.\u003c\/li\u003e\n\u003cli\u003eRemove obstructions.\u003c\/li\u003e\n\u003cli\u003eCheck for loose connections.\u003c\/li\u003e\n\u003cli\u003eRepair damaged ducting.\u003c\/li\u003e\n\u003cli\u003eRemove unnecessary bends where practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFan Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeriodically inspect mounting brackets, the power cord, fan housing, duct connections, intake opening, and exhaust opening. Stop operation if electrical components or the housing show significant damage.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGROW1 4\" Inline Fan\u003c\/li\u003e\n\u003cli\u003e8 Foot Prewired Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGROW1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e4\" Inline Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInline Duct Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Size\u003c\/td\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct Compatibility\u003c\/td\u003e\n\u003ctd\u003e4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e171 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eThermally Protected AC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003e2,910 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eCeramic Coated Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eInline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Length\u003c\/td\u003e\n\u003ctd\u003e8 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Type\u003c\/td\u003e\n\u003ctd\u003ePrewired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Brackets\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Tent Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePropagation Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GROW1","offers":[{"title":"Default Title","offer_id":50038061498618,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/981712_l.jpg?v=1786204675"},{"product_id":"grow1-6-inch-inline-fan","title":"GROW1 6\" Inline Fan","description":"\u003cp\u003eThe GROW1 6\" Inline Fan is a durable, ceramic coated ventilation fan designed to deliver strong, dependable airflow for grow tents, indoor gardens, greenhouses, and general ventilation projects.\u003c\/p\u003e\n\u003cp\u003eProducing 435 CFM, it provides solid air exchange for a wide range of small to mid size growing spaces, while its thermally protected AC motor is built to run reliably over long duty cycles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: Powerful 435 CFM Output\u003c\/li\u003e\n\u003cli\u003eMotor: 2,911 RPM Thermally Protected AC\u003c\/li\u003e\n\u003cli\u003eBuild: Ceramic Coated Metal Housing\u003c\/li\u003e\n\u003cli\u003eSetup: Brackets + 8 Foot Power Cord Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fan’s motor operates at 2,911 RPM and includes thermal protection, which helps guard against overheating during continuous operation. This makes the GROW1 6\" Inline Fan a practical choice for growers who run ventilation systems for extended periods throughout a growing cycle.\u003c\/p\u003e\n\u003cp\u003eUnlike fans built with lightweight plastic housings, the GROW1 6\" Inline Fan uses a ceramic coated metal housing. This construction is designed to resist corrosion, withstand humid grow room conditions, and hold up to repeated use over time.\u003c\/p\u003e\n\u003cp\u003eThe fan comes with mounting brackets and an 8 foot prewired power cord, allowing for a straightforward installation without needing to source additional hardware or wiring.\u003c\/p\u003e\n\u003cp\u003eWhether mounted for intake or exhaust, the GROW1 6\" Inline Fan is designed to integrate easily into new or existing 6 inch ducting systems, making it a dependable addition to a grow tent, grow room, or greenhouse ventilation setup.\u003c\/p\u003e\n\u003ch3\u003e435 CFM Airflow\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 6\" Inline Fan delivers 435 CFM of airflow, suitable for grow tents, indoor gardens, greenhouses, propagation rooms, workshops, and general ventilation applications.\u003c\/p\u003e\n\u003ch3\u003eThermally Protected AC Motor\u003c\/h3\u003e\n\u003cp\u003eThe internal AC motor operates at 2,911 RPM and includes thermal protection. This helps guard the motor against overheating during long duty cycles, supporting more dependable performance in ventilation systems that run for extended periods.\u003c\/p\u003e\n\u003ch3\u003e2,911 RPM Motor Speed\u003c\/h3\u003e\n\u003cp\u003eThe motor’s rated speed of 2,911 RPM is designed to provide the airflow needed for effective ventilation while working in tandem with the fan’s housing and blade design to maintain efficient performance.\u003c\/p\u003e\n\u003ch3\u003eCeramic Coated Metal Housing\u003c\/h3\u003e\n\u003cp\u003eThe fan housing uses a ceramic coated metal construction rather than plastic. This is designed to provide greater resistance to corrosion, better durability in humid grow room environments, and longer service life under repeated use.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Grow Room Conditions\u003c\/h3\u003e\n\u003cp\u003eIndoor growing environments often involve elevated humidity and repeated temperature changes. The ceramic coated housing is intended to hold up to these conditions better than uncoated or plastic alternatives, helping the fan maintain performance over time.\u003c\/p\u003e\n\u003ch3\u003eCompact 6 Inch Design\u003c\/h3\u003e\n\u003cp\u003eThe 6 inch duct size provides solid airflow while remaining compact enough for grow tents, smaller grow rooms, closets, and other confined installation spaces.\u003c\/p\u003e\n\u003ch3\u003eIntake or Exhaust Applications\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 6\" Inline Fan can be installed for either intake or exhaust airflow. Common configurations include exhausting warm air from a tent or room, bringing in fresh air, supporting carbon filtration, and maintaining general air exchange.\u003c\/p\u003e\n\u003ch3\u003eGrow Tent and Grow Room Ventilation\u003c\/h3\u003e\n\u003cp\u003eThe fan is well suited for grow tent and grow room ventilation systems where consistent air exchange is needed to help manage heat, humidity, and fresh air supply. Actual ventilation needs will depend on the size of the space, lighting heat load, ducting configuration, and filtration used.\u003c\/p\u003e\n\u003ch3\u003eGreenhouse and General Ventilation\u003c\/h3\u003e\n\u003cp\u003eBeyond dedicated grow spaces, the fan can also be used for greenhouse ventilation, propagation areas, workshops, and other spaces where reliable 6 inch airflow is needed.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eMounting brackets are included to simplify installation into a 6 inch ducting system. The fan is designed to be positioned inline with minimal additional hardware required.\u003c\/p\u003e\n\u003ch3\u003e8 Foot Prewired Power Cord\u003c\/h3\u003e\n\u003cp\u003eAn 8 foot prewired power cord is included, giving installers flexibility in fan placement without needing to be positioned directly next to an outlet.\u003c\/p\u003e\n\u003ch3\u003eRecommended Installation Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the connected ducting is 6 inches in diameter.\u003c\/li\u003e\n\u003cli\u003eInstall the fan in the correct airflow direction.\u003c\/li\u003e\n\u003cli\u003eSecure the fan using the included mounting brackets.\u003c\/li\u003e\n\u003cli\u003eSupport connected ducting independently when necessary.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs reasonably short.\u003c\/li\u003e\n\u003cli\u003eMinimize unnecessary bends.\u003c\/li\u003e\n\u003cli\u003eKeep intake and exhaust openings unobstructed.\u003c\/li\u003e\n\u003cli\u003eKeep electrical connections dry.\u003c\/li\u003e\n\u003cli\u003eClean connected filters regularly.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation Planning\u003c\/h3\u003e\n\u003cp\u003eFan performance can be affected by duct length, duct diameter, carbon filters, sharp bends, intake restrictions, and exhaust restrictions. The rated 435 CFM represents the fan’s output rating. Actual airflow within an installed system may be lower depending on overall system resistance.\u003c\/p\u003e\n\u003ch3\u003eDucting Setup\u003c\/h3\u003e\n\u003cp\u003eFor stronger ventilation performance: use properly sized 6 inch ducting, keep ducting as straight as practical, avoid crushing flexible ducting, minimize sharp turns, secure connections with appropriate clamps, and seal unwanted air leaks.\u003c\/p\u003e\n\u003ch3\u003eCarbon Filter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into compatible 6 inch filtration systems. When pairing with a carbon filter, confirm the filter uses compatible 6 inch connections, check the filter’s airflow rating against the fan’s output, account for the added airflow resistance, and support the filter independently when appropriate.\u003c\/p\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the fan from power.\u003c\/li\u003e\n\u003cli\u003eInspect the intake and exhaust openings.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect connected ducting.\u003c\/li\u003e\n\u003cli\u003eClean filters according to their manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHousing Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the ceramic coated housing with a soft, dry or lightly damp cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive scrubbing tools that could damage the coating.\u003c\/li\u003e\n\u003cli\u003eKeep the housing free from built up dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuct Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect flexible ducting periodically.\u003c\/li\u003e\n\u003cli\u003eRemove obstructions.\u003c\/li\u003e\n\u003cli\u003eCheck for loose connections.\u003c\/li\u003e\n\u003cli\u003eRepair damaged ducting.\u003c\/li\u003e\n\u003cli\u003eRemove unnecessary bends where practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFan Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeriodically inspect mounting brackets, the power cord, fan housing, duct connections, intake opening, and exhaust opening. Stop operation if electrical components or the housing show significant damage.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGROW1 6\" Inline Fan\u003c\/li\u003e\n\u003cli\u003e8 Foot Prewired Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGROW1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e6\" Inline Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInline Duct Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Size\u003c\/td\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct Compatibility\u003c\/td\u003e\n\u003ctd\u003e6\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e435 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eThermally Protected AC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003e2,911 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eCeramic Coated Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eInline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Length\u003c\/td\u003e\n\u003ctd\u003e8 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Type\u003c\/td\u003e\n\u003ctd\u003ePrewired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Brackets\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Tent Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGreenhouse Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GROW1","offers":[{"title":"Default Title","offer_id":50038061531386,"sku":null,"price":92.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/981712_l_f263e3c7-a745-4db3-93d0-547d36be86e0.jpg?v=1786204906"},{"product_id":"grow1-8-inch-inline-fan","title":"GROW1 8\" Inline Fan","description":"\u003cp\u003eThe GROW1 8\" Inline Fan is a durable, high output ventilation fan designed for larger grow tents, grow rooms, and greenhouses that need substantially more airflow than smaller inline fans can provide.\u003c\/p\u003e\n\u003cp\u003eProducing 745 CFM, it delivers strong air exchange for mid to large size growing spaces, while its thermally protected AC motor is built to run reliably over long duty cycles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: Powerful 745 CFM Output\u003c\/li\u003e\n\u003cli\u003eMotor: 2,530 RPM Thermally Protected AC\u003c\/li\u003e\n\u003cli\u003eBuild: Ceramic Coated Metal Housing\u003c\/li\u003e\n\u003cli\u003eSetup: Brackets + 8 Foot Power Cord Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe fan’s motor operates at 2,530 RPM and includes thermal protection, which helps guard against overheating during continuous operation. This makes the GROW1 8\" Inline Fan a practical choice for growers who run ventilation systems for extended periods throughout a growing cycle.\u003c\/p\u003e\n\u003cp\u003eLike the rest of the GROW1 lineup, this fan uses a ceramic coated metal housing rather than lightweight plastic. This construction is designed to resist corrosion, withstand humid grow room conditions, and hold up to repeated use over time.\u003c\/p\u003e\n\u003cp\u003eThe fan comes with mounting brackets and an 8 foot prewired power cord, allowing for a straightforward installation without needing to source additional hardware or wiring.\u003c\/p\u003e\n\u003cp\u003eWhether mounted for intake or exhaust, the GROW1 8\" Inline Fan is designed to integrate easily into new or existing 8 inch ducting systems, making it a dependable addition to larger grow tent, grow room, or greenhouse ventilation setups.\u003c\/p\u003e\n\u003ch3\u003e745 CFM Airflow\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 8\" Inline Fan delivers 745 CFM of airflow, suitable for larger grow tents, grow rooms, greenhouses, propagation rooms, workshops, and general ventilation applications where more airflow is needed.\u003c\/p\u003e\n\u003ch3\u003eThermally Protected AC Motor\u003c\/h3\u003e\n\u003cp\u003eThe internal AC motor operates at 2,530 RPM and includes thermal protection. This helps guard the motor against overheating during long duty cycles, supporting more dependable performance in ventilation systems that run for extended periods.\u003c\/p\u003e\n\u003ch3\u003e2,530 RPM Motor Speed\u003c\/h3\u003e\n\u003cp\u003eThe motor’s rated speed of 2,530 RPM is designed to provide the airflow needed for effective large scale ventilation while working in tandem with the fan’s housing and blade design to maintain efficient performance.\u003c\/p\u003e\n\u003ch3\u003eCeramic Coated Metal Housing\u003c\/h3\u003e\n\u003cp\u003eThe fan housing uses a ceramic coated metal construction rather than plastic. This is designed to provide greater resistance to corrosion, better durability in humid grow room environments, and longer service life under repeated use.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Grow Room Conditions\u003c\/h3\u003e\n\u003cp\u003eIndoor growing environments often involve elevated humidity and repeated temperature changes. The ceramic coated housing is intended to hold up to these conditions better than uncoated or plastic alternatives, helping the fan maintain performance over time.\u003c\/p\u003e\n\u003ch3\u003eHigh Capacity 8 Inch Design\u003c\/h3\u003e\n\u003cp\u003eThe 8 inch duct size provides significantly more airflow capacity than the smaller GROW1 fans, making it well suited for larger grow tents, grow rooms, greenhouses, and other spaces where more air exchange is needed.\u003c\/p\u003e\n\u003ch3\u003eIntake or Exhaust Applications\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 8\" Inline Fan can be installed for either intake or exhaust airflow. Common configurations include exhausting warm air from a larger tent or room, bringing in fresh air, supporting larger carbon filtration systems, and maintaining general air exchange.\u003c\/p\u003e\n\u003ch3\u003eGrow Room Ventilation\u003c\/h3\u003e\n\u003cp\u003eThe 745 CFM output makes this fan well suited for larger indoor garden spaces where smaller fans may struggle to maintain adequate air exchange. It can help support heat removal, humidity control, fresh air exchange, and environmental stability. Actual ventilation needs will depend on the size of the space, lighting heat load, ducting configuration, and filtration used.\u003c\/p\u003e\n\u003ch3\u003eGreenhouse and General Ventilation\u003c\/h3\u003e\n\u003cp\u003eBeyond dedicated grow rooms, the fan can also be used for larger greenhouse ventilation, workshops, and other spaces where reliable 8 inch airflow is needed.\u003c\/p\u003e\n\u003ch3\u003eEasy Installation\u003c\/h3\u003e\n\u003cp\u003eMounting brackets are included to simplify installation into an 8 inch ducting system. The fan is designed to be positioned inline with minimal additional hardware required.\u003c\/p\u003e\n\u003ch3\u003e8 Foot Prewired Power Cord\u003c\/h3\u003e\n\u003cp\u003eAn 8 foot prewired power cord is included, giving installers flexibility in fan placement without needing to be positioned directly next to an outlet.\u003c\/p\u003e\n\u003ch3\u003eRecommended Installation Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the connected ducting is 8 inches in diameter.\u003c\/li\u003e\n\u003cli\u003eInstall the fan in the correct airflow direction.\u003c\/li\u003e\n\u003cli\u003eSecure the fan using the included mounting brackets.\u003c\/li\u003e\n\u003cli\u003eSupport connected ducting independently when necessary.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs reasonably short.\u003c\/li\u003e\n\u003cli\u003eMinimize unnecessary bends.\u003c\/li\u003e\n\u003cli\u003eKeep intake and exhaust openings unobstructed.\u003c\/li\u003e\n\u003cli\u003eKeep electrical connections dry.\u003c\/li\u003e\n\u003cli\u003eClean connected filters regularly.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation Planning\u003c\/h3\u003e\n\u003cp\u003eFan performance can be affected by duct length, duct diameter, carbon filters, sharp bends, intake restrictions, and exhaust restrictions. The rated 745 CFM represents the fan’s output rating. Actual airflow within an installed system may be lower depending on overall system resistance.\u003c\/p\u003e\n\u003ch3\u003eDucting Setup\u003c\/h3\u003e\n\u003cp\u003eFor stronger ventilation performance: use properly sized 8 inch ducting, keep ducting as straight as practical, avoid crushing flexible ducting, minimize sharp turns, secure connections with appropriate clamps, and seal unwanted air leaks.\u003c\/p\u003e\n\u003ch3\u003eCarbon Filter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into compatible 8 inch filtration systems. When pairing with a carbon filter, confirm the filter uses compatible 8 inch connections, check the filter’s airflow rating against the fan’s output, account for the added airflow resistance, and support the filter independently when appropriate.\u003c\/p\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the fan from power.\u003c\/li\u003e\n\u003cli\u003eInspect the intake and exhaust openings.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect connected ducting.\u003c\/li\u003e\n\u003cli\u003eClean filters according to their manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHousing Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the ceramic coated housing with a soft, dry or lightly damp cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive scrubbing tools that could damage the coating.\u003c\/li\u003e\n\u003cli\u003eKeep the housing free from built up dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuct Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect flexible ducting periodically.\u003c\/li\u003e\n\u003cli\u003eRemove obstructions.\u003c\/li\u003e\n\u003cli\u003eCheck for loose connections.\u003c\/li\u003e\n\u003cli\u003eRepair damaged ducting.\u003c\/li\u003e\n\u003cli\u003eRemove unnecessary bends where practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFan Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeriodically inspect mounting brackets, the power cord, fan housing, duct connections, intake opening, and exhaust opening. Stop operation if electrical components or the housing show significant damage.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGROW1 8\" Inline Fan\u003c\/li\u003e\n\u003cli\u003e8 Foot Prewired Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGROW1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e8\" Inline Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInline Duct Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Size\u003c\/td\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct Compatibility\u003c\/td\u003e\n\u003ctd\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e745 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eThermally Protected AC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003e2,530 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eCeramic Coated Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eInline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntake Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Use\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Length\u003c\/td\u003e\n\u003ctd\u003e8 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Type\u003c\/td\u003e\n\u003ctd\u003ePrewired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Brackets\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Tent Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Room Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGreenhouse Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GROW1","offers":[{"title":"Default Title","offer_id":50038061564154,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/981712_l_4dd84026-0e91-47d4-b098-43f3a94744d9.jpg?v=1786204999"},{"product_id":"grow1-10-inch-inline-fan","title":"GROW1 10\" Inline Fan","description":"\u003cp\u003eThe GROW1 10\" Inline Fan is a high output ventilation fan built for grow rooms, larger grow tents, filtration systems, and indoor environments that require serious air movement.\u003c\/p\u003e\n\u003cp\u003eProducing 580 CFM, it delivers strong airflow for larger growing spaces, while its thermally protected AC motor and molded impeller are built to run reliably under the higher static pressure created by long duct runs, carbon filters, and multi light air cooling setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: 580 CFM Output\u003c\/li\u003e\n\u003cli\u003eDuct Size: 10 Inches\u003c\/li\u003e\n\u003cli\u003eBuild: Ceramic Coated Metal Housing\u003c\/li\u003e\n\u003cli\u003eSetup: Brackets + 8 Foot Prewired Power Cord Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned for use with standard 10 inch ducting, this fan can be configured for exhaust, intake, carbon filtration, or air cooled lighting applications. Its powerful airflow helps remove accumulated heat, exchange stale air, and maintain a more controlled growing environment.\u003c\/p\u003e\n\u003cp\u003eLike the rest of the GROW1 lineup, this fan uses a ceramic coated metal housing rather than lightweight plastic. This construction is designed to resist corrosion, withstand humid grow room conditions, and hold up to repeated use over time.\u003c\/p\u003e\n\u003cp\u003eThe fan comes with mounting brackets and an 8 foot prewired 120V power cord, allowing for a straightforward, plug and play installation without needing to source additional hardware or wiring.\u003c\/p\u003e\n\u003cp\u003eThe durable construction makes the GROW1 10\" a strong choice for growers stepping beyond smaller ventilation systems and needing greater airflow capacity for larger spaces or more demanding equipment configurations.\u003c\/p\u003e\n\u003ch3\u003e580 CFM Airflow\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 10\" Inline Fan delivers 580 CFM of airflow, suitable for larger grow rooms, grow tents, greenhouses, carbon filtration systems, and air cooled lighting setups.\u003c\/p\u003e\n\u003ch3\u003ePowerful 10 Inch Ventilation\u003c\/h3\u003e\n\u003cp\u003eThe larger 10 inch design provides high volume airflow for demanding indoor growing environments where smaller inline fans may struggle to maintain sufficient air exchange.\u003c\/p\u003e\n\u003cp\u003eIdeal applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrow rooms and larger grow tents\u003c\/li\u003e\n\u003cli\u003eExhaust ventilation\u003c\/li\u003e\n\u003cli\u003eFresh air intake\u003c\/li\u003e\n\u003cli\u003eCarbon filter systems\u003c\/li\u003e\n\u003cli\u003eAir cooled lighting\u003c\/li\u003e\n\u003cli\u003eHeat extraction\u003c\/li\u003e\n\u003cli\u003eGeneral air circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThermally Protected AC Motor\u003c\/h3\u003e\n\u003cp\u003eThe internal AC motor includes thermal protection to help guard against overheating during long duty cycles, supporting more dependable performance in ventilation systems that run continuously.\u003c\/p\u003e\n\u003ch3\u003eMolded Impeller Design\u003c\/h3\u003e\n\u003cp\u003eThe fan uses a specially molded impeller designed to maintain consistent airflow performance even under the higher static pressure created by long duct runs, carbon filters, and multi light air cooling configurations.\u003c\/p\u003e\n\u003ch3\u003eCeramic Coated Metal Housing\u003c\/h3\u003e\n\u003cp\u003eThe fan housing uses a ceramic coated metal construction rather than plastic. This is designed to provide greater resistance to corrosion, better durability in humid grow room environments, and longer service life under repeated use.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Grow Room Environments\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 Inline Fan is designed specifically around the ventilation demands of horticultural environments. Proper airflow can help manage accumulated heat, exchange stale air, support filtration, and maintain a healthier overall environment around your plants.\u003c\/p\u003e\n\u003ch3\u003eIntake or Exhaust Configuration\u003c\/h3\u003e\n\u003cp\u003eUse the GROW1 10\" Inline Fan as part of either an intake or exhaust system depending on your ventilation design. It can also be paired with compatible ducting and filtration equipment to create a complete air management system.\u003c\/p\u003e\n\u003ch3\u003eWhisper Quiet Operation\u003c\/h3\u003e\n\u003cp\u003eThe fan is optimized for high output performance without the excessive noise common in industrial fans, helping it run in the background without becoming disruptive.\u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003eThe fan includes UL recognized components and thermal protection to help prevent overheating during continuous 24\/7 operation.\u003c\/p\u003e\n\u003ch3\u003eEasy Integration\u003c\/h3\u003e\n\u003cp\u003eThe standard 10 inch connection makes the fan easy to integrate with compatible ducting, carbon filters, silencers, dampers, and other ventilation accessories.\u003c\/p\u003e\n\u003ch3\u003eRecommended Installation Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the connected ducting is 10 inches in diameter.\u003c\/li\u003e\n\u003cli\u003eInstall the fan in the correct airflow direction.\u003c\/li\u003e\n\u003cli\u003eSecure the fan using the included mounting brackets.\u003c\/li\u003e\n\u003cli\u003eSupport connected ducting independently when necessary.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs reasonably short.\u003c\/li\u003e\n\u003cli\u003eMinimize unnecessary bends.\u003c\/li\u003e\n\u003cli\u003eKeep intake and exhaust openings unobstructed.\u003c\/li\u003e\n\u003cli\u003eKeep electrical connections dry.\u003c\/li\u003e\n\u003cli\u003eClean connected filters regularly.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation Planning\u003c\/h3\u003e\n\u003cp\u003eFan performance can be affected by duct length, duct diameter, carbon filters, sharp bends, intake restrictions, and exhaust restrictions. The rated 580 CFM represents the fan’s output rating. Actual airflow within an installed system may be lower depending on overall system resistance.\u003c\/p\u003e\n\u003ch3\u003eDucting Setup\u003c\/h3\u003e\n\u003cp\u003eFor stronger ventilation performance: use properly sized 10 inch ducting, keep ducting as straight as practical, avoid crushing flexible ducting, minimize sharp turns, secure connections with appropriate clamps, and seal unwanted air leaks.\u003c\/p\u003e\n\u003ch3\u003eCarbon Filter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into compatible 10 inch filtration systems. When pairing with a carbon filter, confirm the filter uses compatible 10 inch connections, check the filter’s airflow rating against the fan’s output, account for the added airflow resistance, and support the filter independently when appropriate.\u003c\/p\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the fan from power.\u003c\/li\u003e\n\u003cli\u003eInspect the intake and exhaust openings.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect connected ducting.\u003c\/li\u003e\n\u003cli\u003eClean filters according to their manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHousing Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the ceramic coated housing with a soft, dry or lightly damp cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive scrubbing tools that could damage the coating.\u003c\/li\u003e\n\u003cli\u003eKeep the housing free from built up dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuct Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect flexible ducting periodically.\u003c\/li\u003e\n\u003cli\u003eRemove obstructions.\u003c\/li\u003e\n\u003cli\u003eCheck for loose connections.\u003c\/li\u003e\n\u003cli\u003eRepair damaged ducting.\u003c\/li\u003e\n\u003cli\u003eRemove unnecessary bends where practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFan Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeriodically inspect mounting brackets, the power cord, fan housing, duct connections, intake opening, and exhaust opening. Stop operation if electrical components or the housing show significant damage.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGROW1 10\" Inline Fan\u003c\/li\u003e\n\u003cli\u003e8 Foot Prewired Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGROW1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003e10\" Inline Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003e981710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHigh Output Inline Duct Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Size\u003c\/td\u003e\n\u003ctd\u003e10 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct Compatibility\u003c\/td\u003e\n\u003ctd\u003e10 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e580 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Type\u003c\/td\u003e\n\u003ctd\u003eThermally Protected AC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller\u003c\/td\u003e\n\u003ctd\u003eMolded Impeller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eCeramic Coated Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eInline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplications\u003c\/td\u003e\n\u003ctd\u003eIntake, Exhaust, Filtration, Air Cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e120V, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Length\u003c\/td\u003e\n\u003ctd\u003e8 Feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord Type\u003c\/td\u003e\n\u003ctd\u003ePrewired\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Brackets\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponents\u003c\/td\u003e\n\u003ctd\u003eUL Recognized Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e16 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14\" L × 14\" W × 9\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Room Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Tent Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GROW1","offers":[{"title":"Default Title","offer_id":50038062285050,"sku":null,"price":219.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/981712_l_6c9306cc-b3b9-42d6-81b3-696cd9a713ac.jpg?v=1786205091"},{"product_id":"grow1-12-inch-inline-fan","title":"GROW1 12\" Inline Fan","description":"\u003cp\u003eThe GROW1 12\" Inline Fan is a powerful, high capacity ventilation solution built for large grow rooms, commercial cultivation spaces, filtration systems, and demanding indoor growing environments.\u003c\/p\u003e\n\u003cp\u003eDelivering up to 1,060 CFM of airflow, this 12 inch fan provides the air movement needed to exhaust excess heat, bring fresh air into the growing environment, and pull air through compatible carbon filtration systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirflow: Powerful 1,060 CFM Output\u003c\/li\u003e\n\u003cli\u003eDuct Size: High Capacity 12 Inch Design\u003c\/li\u003e\n\u003cli\u003eConstruction: Durable Metal Housing\u003c\/li\u003e\n\u003cli\u003eSetup: Brackets + 8 Foot Cord Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIts durable metal housing, molded impeller, and thermally protected AC motor are designed for dependable operation, while quiet performance helps keep larger ventilation systems manageable. Mounting brackets and an attached 8 foot power cord are included for straightforward installation.\u003c\/p\u003e\n\u003ch3\u003eHigh Output 1,060 CFM Airflow\u003c\/h3\u003e\n\u003cp\u003eWith up to 1,060 CFM, the GROW1 12\" Inline Fan is built to exchange large volumes of air efficiently, making it an excellent choice for larger cultivation environments.\u003c\/p\u003e\n\u003ch3\u003eVersatile Ventilation\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into a variety of ventilation configurations, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGrow room exhaust\u003c\/li\u003e\n\u003cli\u003eFresh air intake\u003c\/li\u003e\n\u003cli\u003eCarbon filtration\u003c\/li\u003e\n\u003cli\u003eHeat extraction\u003c\/li\u003e\n\u003cli\u003eAir cooled lighting systems\u003c\/li\u003e\n\u003cli\u003eGeneral air circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDurable Metal Construction\u003c\/h3\u003e\n\u003cp\u003eA durable ceramic coated metal housing protects the internal components, while the high quality molded impeller is designed for reliable airflow performance.\u003c\/p\u003e\n\u003ch3\u003eThermally Protected AC Motor\u003c\/h3\u003e\n\u003cp\u003eThe powerful 300W AC motor operates at approximately 2,573 RPM and incorporates thermal protection for additional reliability during demanding ventilation applications.\u003c\/p\u003e\n\u003ch3\u003eBuilt for Large Grow Rooms\u003c\/h3\u003e\n\u003cp\u003eThe GROW1 12\" Inline Fan is well suited for large grow rooms, commercial cultivation spaces, and multi tent facilities where smaller fans may struggle to maintain adequate air exchange. It can help support heat removal, humidity control, fresh air exchange, and environmental stability across a larger footprint. Actual airflow requirements depend on room size, total lighting heat load, ducting configuration, and filtration resistance.\u003c\/p\u003e\n\u003ch3\u003eIntake or Exhaust Configuration\u003c\/h3\u003e\n\u003cp\u003eUse the GROW1 12\" Inline Fan as part of either an intake or exhaust system depending on your ventilation design. It can also be paired with compatible ducting and filtration equipment to create a complete air management system.\u003c\/p\u003e\n\u003ch3\u003eQuiet Performance\u003c\/h3\u003e\n\u003cp\u003eDespite its high output, the fan is designed for quieter operation that helps keep larger ventilation systems more manageable in occupied spaces.\u003c\/p\u003e\n\u003ch3\u003eSafety Features\u003c\/h3\u003e\n\u003cp\u003eThe fan includes UL recognized components and thermal protection to help prevent overheating during continuous operation.\u003c\/p\u003e\n\u003ch3\u003eInstallation Ready\u003c\/h3\u003e\n\u003cp\u003eMounting brackets and an 8 foot prewired 120V power cord are included, helping simplify installation into compatible 12 inch ventilation systems.\u003c\/p\u003e\n\u003ch3\u003eEasy Integration\u003c\/h3\u003e\n\u003cp\u003eThe standard 12 inch connection makes the fan easy to integrate with compatible ducting, carbon filters, silencers, dampers, and other ventilation accessories.\u003c\/p\u003e\n\u003ch3\u003eRecommended Installation Practices\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the connected ducting is 12 inches in diameter.\u003c\/li\u003e\n\u003cli\u003eInstall the fan in the correct airflow direction.\u003c\/li\u003e\n\u003cli\u003eSecure the fan using the included mounting brackets.\u003c\/li\u003e\n\u003cli\u003eProvide additional structural support given the fan’s size and weight.\u003c\/li\u003e\n\u003cli\u003eConfirm the electrical circuit can support the fan’s 2.50A draw.\u003c\/li\u003e\n\u003cli\u003eKeep duct runs reasonably short.\u003c\/li\u003e\n\u003cli\u003eMinimize unnecessary bends.\u003c\/li\u003e\n\u003cli\u003eKeep intake and exhaust openings unobstructed.\u003c\/li\u003e\n\u003cli\u003eKeep electrical connections dry.\u003c\/li\u003e\n\u003cli\u003eClean connected filters regularly.\u003c\/li\u003e\n\u003cli\u003eDisconnect power before maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVentilation Planning\u003c\/h3\u003e\n\u003cp\u003eFan performance can be affected by duct length, duct diameter, carbon filters, sharp bends, intake restrictions, and exhaust restrictions. The rated 1,060 CFM represents the fan’s output rating. Actual airflow within an installed system may be lower depending on overall system resistance.\u003c\/p\u003e\n\u003ch3\u003eDucting Setup\u003c\/h3\u003e\n\u003cp\u003eFor stronger ventilation performance: use properly sized 12 inch ducting, keep ducting as straight as practical, avoid crushing flexible ducting, minimize sharp turns, secure connections with appropriate clamps, and seal unwanted air leaks.\u003c\/p\u003e\n\u003ch3\u003eCarbon Filter Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe fan can be incorporated into compatible 12 inch filtration systems. When pairing with a carbon filter, confirm the filter uses compatible 12 inch connections, check the filter’s airflow rating against the fan’s output, account for the added airflow resistance, and support the filter independently given its size and weight.\u003c\/p\u003e\n\u003ch3\u003eCleaning and Maintenance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRoutine Cleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect the fan from power.\u003c\/li\u003e\n\u003cli\u003eInspect the intake and exhaust openings.\u003c\/li\u003e\n\u003cli\u003eRemove accumulated dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect connected ducting.\u003c\/li\u003e\n\u003cli\u003eClean filters according to their manufacturer instructions.\u003c\/li\u003e\n\u003cli\u003eConfirm mounting hardware remains secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHousing Care\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWipe the ceramic coated housing with a soft, dry or lightly damp cloth.\u003c\/li\u003e\n\u003cli\u003eAvoid abrasive scrubbing tools that could damage the coating.\u003c\/li\u003e\n\u003cli\u003eKeep the housing free from built up dust and debris.\u003c\/li\u003e\n\u003cli\u003eInspect the coating periodically for wear or damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDuct Maintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspect flexible ducting periodically, especially at connection points.\u003c\/li\u003e\n\u003cli\u003eRemove obstructions.\u003c\/li\u003e\n\u003cli\u003eCheck clamps and seals.\u003c\/li\u003e\n\u003cli\u003eRepair damaged sections promptly.\u003c\/li\u003e\n\u003cli\u003eStraighten unnecessary bends where practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFan Inspection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePeriodically inspect mounting brackets, the power cord, fan housing, duct connections, intake opening, and exhaust opening. Given the fan’s size and weight, confirm mounting supports remain adequate over time. Stop operation if electrical components or the housing show significant damage.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGROW1 12\" Inline Fan\u003c\/li\u003e\n\u003cli\u003e8 Foot Prewired 120V Power Cord\u003c\/li\u003e\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGROW1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInline Duct Fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFan Size\u003c\/td\u003e\n\u003ctd\u003e12 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDuct Compatibility\u003c\/td\u003e\n\u003ctd\u003e12 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003e1,060 CFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120V, 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmperage\u003c\/td\u003e\n\u003ctd\u003e2.50A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor Speed\u003c\/td\u003e\n\u003ctd\u003e2,573 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eCeramic Coated Metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpeller\u003c\/td\u003e\n\u003ctd\u003eHigh Quality Molded Impeller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003eThermally Protected AC Motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Cord\u003c\/td\u003e\n\u003ctd\u003e8 Foot Prewired 120V Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Brackets\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponents\u003c\/td\u003e\n\u003ctd\u003eUL Recognized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrow Room Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommercial Cultivation Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"GROW1","offers":[{"title":"Default Title","offer_id":50038063530234,"sku":null,"price":249.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0847\/7487\/9482\/files\/981712_l_6b4f37b3-1ab8-4a04-ba46-56ab217acfab.jpg?v=1786205236"}],"url":"https:\/\/cultivasupply.com\/collections\/grow1-inline-fans.oembed","provider":"Cultiva Supply","version":"1.0","type":"link"}